Shop By Brand

Shop By Brand

Rebel Off Road carries a huge lineup of off road accessories for the out door enthusiast. No matter how mild or extreme you dream of taking your vehicle we have the product that works best for you.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • RockJock® JK Rear Lower Adjustable Control Arms With Johnny Joint®s - Pair
    Add to Cart
    Quick view

    RockJock® JK Rear Lower Adjustable Control Arms With Johnny Joint®s - Pair

    RockJock 4x4

    $418.00
    These are the adjustable length Johnny Joint® front lower control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.625" o.d. x .250" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the...
    $418.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $418.00
    Subtotal:
    Add to Cart
  • TeraFlex JK/JKU Transfer Case Output Yoke U-Bolt Conversion Kit - Each - 4949100
    Add to Cart
    Quick view

    TeraFlex JK/JKU Transfer Case Output Yoke U-Bolt Conversion Kit - Each - 4949100

    Teraflex

    $131.99
    The TeraFlex JK/JKU Yoke U-Bolt Conversion Kit replaces the OEM Rzeppa CV flange with a standard 1310 CV cardan joint style yoke and U-bolt style connector to run a CV style (double cardan) driveshaft. U-joints are easier to change compared to CV joints...
    $131.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $131.99
    Subtotal:
    Add to Cart
  • 1972-09 Wrangler and CJ 1984-01 XJ Cherokee 1986-92 MJ Comanche 1993-98 ZJ Grand Cherokee 1999-04 WJ Grand Cherokee 2002-07 KJ Liberty Dana Model 30 front axle 27 spline Gear ratio 2.73 to 3.54 An incorporated, computer-optimized cross brace design adds over 900 foot-pounds of torsional rigidity to the entire axle assembly. The resulting increased flex strength in the housing encourages improved meshing of the ring and pinion gears and greater carrier bearing support for longer component life and overall load strength. The low profile shape of the housing maximizes the running gear clearance around the unit and provides optimal approach and departure angles. A unique combination dipstick and filler cap design allows for the differential oil levels to be adjusted for customized high driveline angles and allows the user to check the oil for possible water contamination without having to drain the unit. Made from high quality rare earth magnets, both the dipstick and the drain plug are designed to collect any metal wear particles floating in the fluid. Powder coated in red, CNC machined and then clear coated for durable finish, the ARB differential cover is the perfect way to protect your differential assembly.
    Add to Cart
    Quick view

    ARB Competition Differential Cover Dana 30

    ARB

    MSRP: $198.88
    $187.00
    1972-09 Wrangler and CJ 1984-01 XJ Cherokee 1986-92 MJ Comanche 1993-98 ZJ Grand Cherokee 1999-04 WJ Grand Cherokee 2002-07 KJ Liberty Dana Model 30 front axle 27 spline Gear ratio 2.73 to 3.54 An incorporated, computer-optimized cross brace design...
    MSRP: $198.88
    $187.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $198.88
    $187.00
    Subtotal:
    Add to Cart
  • RockJock® Rear Coil Spring - LJ Standard - (TJ +.5) - Pair
    Add to Cart
    Quick view

    RockJock® Rear Coil Spring - LJ Standard - (TJ +.5) - Pair

    RockJock 4x4

    $284.00
    These are our optional 4" rear coil springs that are available for use in our Johnny Joint® TJ/LJ suspension system. These springs are 1/2" taller than our standard spring and is most commonly used in LJ (Unilimited) applications or in heavily loaded TJ...
    $284.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $284.00
    Subtotal:
    Add to Cart
  • RockJock® 2.0 JJ - Internally Greased - W/0.500 Hole X 2.00 OAW - Cross Drilled W/ Grease Bolt - Each
    Add to Cart
    Quick view

    RockJock® 2.0 JJ - Internally Greased - W/0.500 Hole X 2.00 OAW - Cross Drilled W/ Grease Bolt - Each

    RockJock 4x4

    $63.00
    For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint® rod ends are made with a high-density,...
    $63.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $63.00
    Subtotal:
    Add to Cart
  • Airaid Intake Systems use nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. Up to 20% gains in airflow, and up to 18 in horsepower. Special injection molding techniques are use on most parts and filters are washable, reusable and last the life of the vehicle. A 30-minute installer-friendly installation with no drilling required.Fits 1991 to 2001 XJ Cherokee Fits 1991 to 1992 MJ Comanche 4.0L 6 cylinder 30% more air flow than original intake Increased throttle response Improved economy
    Add to Cart
    Quick view

    AIRAID Cool Air Dam Intake System, 1991-2001 Jeep XJ Cherokee, 4.0L

    Airaid

    $209.99
    Airaid Intake Systems use nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. Up to...
    $209.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $209.99
    Subtotal:
    Add to Cart
  • RockJock® Rear Brake Line Kit For JK Lift - Used with Rear Antirock® Only - (25.5 In) - Pair
    Add to Cart
    Quick view

    RockJock® Rear Brake Line Kit For JK Lift - Used with Rear Antirock® Only - (25.5 In) - Pair

    RockJock 4x4

    $125.00
    This is the D.O.T. approved stainless braided extended brake line kit from the RockJock® JK off road suspension system. This kit is ONLY used in conjunction with a rear Antirock® sway bar kit. If stock rear sway bar is being retained - you will need the...
    $125.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $125.00
    Subtotal:
    Add to Cart
  • TeraFlex Trail Recovery Kit - 5028995
    Add to Cart
    Quick view

    TeraFlex Trail Recovery Kit - 5028995

    Teraflex

    $149.99
    The TeraFlex Trail Recovery Kit comes with all the essential recovery tools needed for the most common pulling tasks packed in our heavy-duty tool & gear bag. This kit is a bargain compared to buying each item separately. Don’t go out on any...
    $149.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $149.99
    Subtotal:
    Add to Cart
  • Tuff Country ABS Sensor Plugs
    Add to Cart
    Quick view

    Tuff Country ABS Sensor Plugs

    Tuff Country Suspension

    $56.69
    Tuff Country ABS plugs are for Toyota Tundra and Tacomas that do not have ABS brakes.
    $56.69
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $56.69
    Subtotal:
    Add to Cart
  • S&B Cold Air Intake, 2007-2011 Jeep Wrangler JK 3.8L (Dry Extendable Filter)
    Add to Cart
    Quick view

    S&B Cold Air Intake, 2007-2011 Jeep Wrangler JK 3.8L (Dry Extendable Filter)

    SB Filters

    $349.00
    Filter Type - Dry FilterAirflow Rating - 69.83% more air flow over stock intakeEfficiency Rating - 99.64% efficient @ 260 CFM (ISO Coarse Dust)Weight - 9.0000UPC - 841372036330Street Legal In All US States - YesCARB Exempt ID - D-590-11Breathe easy. Your...
    $349.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $349.00
    Subtotal:
    Add to Cart
  • Edelbrock E-Force Supercharger w/ Tune, 2012-2014 Jeep Wrangler JK 3.6L V6
    Add to Cart
    Quick view

    Edelbrock E-Force Supercharger w/ Tune, 2012-2014 Jeep Wrangler JK 3.6L V6

    Edelbrock

    $7,183.87
    The Edelbrock Supercharger System #1527 for your 2012-14 Jeep Wrangler delivers 317 RWHP and 277 RWTQ for a manual and 303 RWHP and 262 RWTQ for an automatic. This Supercharger is exclusively for the Pentastar 3.6L V6 engine with a unique design and...
    $7,183.87
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $7,183.87
    Subtotal:
    Add to Cart
  • RockJock® Rear Coil Spring - TJ Standard - (LJ -.5) - Pair
    Add to Cart
    Quick view

    RockJock® Rear Coil Spring - TJ Standard - (LJ -.5) - Pair

    RockJock 4x4

    $284.00
    These are our 4" rear coil springs that are included in our Johnny Joint® TJ suspension system. In heavily loaded TJ or LJ (Unlimited) applications, these springs may not provide a full 4" of lift. In this instance, see our CE-9131RH3 spring for a little...
    $284.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $284.00
    Subtotal:
    Add to Cart
  • These new Intensity LED lamps from ARB utilize a pressure die cast aluminum lightweight body that also acts as a heat sink where the removable LED circuit board containing 32 SMD LEDs mounts into the front face. The Hybrid Optics (reflector & lens) are then located within a retaining bezel and held in place by the super strong polycarbonate lens. With the light assembly weighing close to 6.75 lbs, a mounting system was designed from TIG welded 304 grade stainless steel to ensure integrity under the harshest conditions. These amazing lights feature a 6500k or Kelvin color with an output of 8200 lumens. With a life span of 50,000+ hours and an IP68 Certification you will not find a better and more powerful auxiliary light. In 2009 ARB engineers started a development program to produce an ARB driving light with a completely new design incorporating the latest LED technologies. Unlike light bars that were growing in popularity, ARB required a light that was compatible with current bull bar designs and traditional driving light mounting points. They also needed to be a legal fitment which, in many states, light bars are not. Many ARB customers prefer a combination of a spot and spread driving light due to the various driving conditions encountered in general off-roading. Most LED light bars on the market are considered great lights for slower off road driving where the ability to see great distances is not so critical. For ARBÂ’s new light to compete with the best the market can offer in Halogen and HID lighting, it needed to give not only the broad flood beam associated with light bars but also a spot beam with the ability to penetrate longer distances. Integral to the design was the need for the light to be robust and suited to the conditions encountered off-road like the constant vibrations of corrugated roads, animal strikes and the ability to be submersed. With the general abuse that off-road driving can dish out, the light also needed to be serviceable. During the development stage, many advances in LED and optics design meant that the LED array and circuitry changed numerous times. With many tens of thousands to be invested in tooling, this meant that the design of the light body needed to be ‘future proofedÂ’ so that further advances in technology would not require re-tooling. The final design utilises a pressure die cast aluminium light body that acts as a heat sink where the removable LED circuit board containing SMD LEDs mounts into the front face. The Hybrid Optics (reflector & lens) are then located within a retaining bezel and held in place by the polycarbonate lens. Any future advances in technology therefore only require changes to the circuit board and optics. Although SMD (surface mount) LEDs run very cool in comparison to traditional resin encased LEDs, the circuitry and associated components that power them get quite hot, requiring large heat sinks and cooling fins with increased surface area to draw the heat away from the circuit board. This required that the light body be manufactured from aluminium but due to its round shape, a pressure cast aluminium body was preferable over an alloy extrusion used in light bars. With the light assembly weighing close to 6.75 lbs, a mounting system was designed from TIG welded 304 grade stainless steel to ensure integrity under the harshest conditions. Stainless steel offers considerable strength over other designs and with a requirement to handle vibration, prototypes of the new light undertook Military Specification vibration testing on a shaker table by an approved facility in Melbourne. Attached to an ARB bull bar the shaker table put both the light and bar through severe testing, with both the light and bar mounts resisting fatigue and passing the test. Further testing was then carried out to ensure the light was waterproof, with the light achieving a rating of IP68. IP ratings are an international code giving an Ingress Protection Rating and classifies in this case the level of protection given to an electrical enclosure. The ‘6Â’ in the code relates to solid particle protection and is the highest rating: Dust tight-No ingress of dust; complete protection against contact. The ‘8Â’ relates to liquid ingress protection and is also the highest rating: Immersion beyond 3.25 ft. - The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. To finish the outer surfaces of the light to ensure durability under the harshest conditions, the aluminium body is finished in a textured polyester powder coat that passes the ISO7253 3000 hour salt spray test. The lens retaining bezel is finished in a UV resistant red two pack automotive paint. This combined with the 304 stainless steel mount makes the ARB Intensity light extremely corrosion resistant. Performance of the light can only be described as intense and hence where it derives the name ‘ARB IntensityÂ’. At 6500K, the color temperature of the LEDs is as close to daylight as possible and with 32 LEDÂ’s per light producing a broad beam, even on spot versions the lights illuminate everything in the driverÂ’s forward field of view. No longer does the driver find themselves straining to see beyond the edge of the beam, hence reducing fatigue. ARB Intensity LED lights are sold separately as either a spot or flood beam. A new wiring loom has been developed that includes waterproof Deutsch DT-06 connectors and is available by ordering P/No 3500520.
    Add to Cart
    Quick view

    ARB Intensity LED Light - Spot Beam Pattern

    ARB

    $844.00
    These new Intensity LED lamps from ARB utilize a pressure die cast aluminum lightweight body that also acts as a heat sink where the removable LED circuit board containing 32 SMD LEDs mounts into the front face. The Hybrid Optics (reflector & lens) are...
    $844.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $844.00
    Subtotal:
    Add to Cart
  • Cold Air Intake for 2007-2011 Jeep Wrangler JK 3.8L
    Add to Cart
    Quick view

    Cold Air Intake for 2007-2011 Jeep Wrangler JK 3.8L

    SB Filters

    $349.00
    Filter Type - Cotton FilterAirflow Rating - 70.09% more airflow than the stock intakeEfficiency Rating - 99.51% efficient @ 279 CFM (ISO Coarse Dust)Weight - 12.0000UPC - 841372036323Quantity of Oil - 70 gramsOil Color - RedStreet Legal In All US States...
    $349.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $349.00
    Subtotal:
    Add to Cart
  • TeraFlex TJ/LJ Transfer Case Shift Linkage Adapter Kit - 4947100
    Add to Cart
    Quick view

    TeraFlex TJ/LJ Transfer Case Shift Linkage Adapter Kit - 4947100

    Teraflex

    $115.99
    The TeraFlex TJ/LJ Shift Link Adapter makes shifting your 231 Transfer Case into all low range sectors simple. This kit fixes the issues of the trouble prone and unreliable stock linkage caused by independent body and drivetrain movement. The new bracket...
    $115.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $115.99
    Subtotal:
    Add to Cart
  • RockJock® JK Front Upper Adjustable Control Arms with Johnny Joint®s - Pair
    Add to Cart
    Quick view

    RockJock® JK Front Upper Adjustable Control Arms with Johnny Joint®s - Pair

    RockJock 4x4

    $410.00
    These are the adjustable length Johnny Joint® front upper control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.25" o.d. x .188" wall d.o.m. steel tubing, feature the 2" Johnny Joint® rod end on one end, and a formed...
    $410.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $410.00
    Subtotal:
    Add to Cart
  • TeraFlex JK Windshield Sun Shade - 5028701
    Add to Cart
    Quick view

    TeraFlex JK Windshield Sun Shade - 5028701

    Teraflex

    $18.99
    Reduce interior temperatures with the attractive TeraFlex JK Windshield Sun Shade. The thick double layer insulation blocks UV rays that can damage the dashboard and interior pieces. Folds easily and stays organized with elastic straps. SPECIFICATIONS:...
    $18.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $18.99
    Subtotal:
    Add to Cart
  • These new Intensity LED lamps from ARB utilize a pressure die cast aluminum lightweight body that also acts as a heat sink where the removable LED circuit board containing 32 SMD LEDs mounts into the front face. The Hybrid Optics (reflector & lens) are then located within a retaining bezel and held in place by the super strong polycarbonate lens. With the light assembly weighing close to 6.75 lbs, a mounting system was designed from TIG welded 304 grade stainless steel to ensure integrity under the harshest conditions. These amazing lights feature a 6500k or Kelvin color with an output of 8200 lumens. With a life span of 50,000+ hours and an IP68 Certification you will not find a better and more powerful auxiliary light. In 2009 ARB engineers started a development program to produce an ARB driving light with a completely new design incorporating the latest LED technologies. Unlike light bars that were growing in popularity, ARB required a light that was compatible with current bull bar designs and traditional driving light mounting points. They also needed to be a legal fitment which, in many states, light bars are not. Many ARB customers prefer a combination of a spot and spread driving light due to the various driving conditions encountered in general off-roading. Most LED light bars on the market are considered great lights for slower off road driving where the ability to see great distances is not so critical. For ARBÂ’s new light to compete with the best the market can offer in Halogen and HID lighting, it needed to give not only the broad flood beam associated with light bars but also a spot beam with the ability to penetrate longer distances. Integral to the design was the need for the light to be robust and suited to the conditions encountered off-road like the constant vibrations of corrugated roads, animal strikes and the ability to be submersed. With the general abuse that off-road driving can dish out, the light also needed to be serviceable. During the development stage, many advances in LED and optics design meant that the LED array and circuitry changed numerous times. With many tens of thousands to be invested in tooling, this meant that the design of the light body needed to be ‘future proofedÂ’ so that further advances in technology would not require re-tooling. The final design utilises a pressure die cast aluminium light body that acts as a heat sink where the removable LED circuit board containing SMD LEDs mounts into the front face. The Hybrid Optics (reflector & lens) are then located within a retaining bezel and held in place by the polycarbonate lens. Any future advances in technology therefore only require changes to the circuit board and optics. Although SMD (surface mount) LEDs run very cool in comparison to traditional resin encased LEDs, the circuitry and associated components that power them get quite hot, requiring large heat sinks and cooling fins with increased surface area to draw the heat away from the circuit board. This required that the light body be manufactured from aluminium but due to its round shape, a pressure cast aluminium body was preferable over an alloy extrusion used in light bars. With the light assembly weighing close to 6.75 lbs, a mounting system was designed from TIG welded 304 grade stainless steel to ensure integrity under the harshest conditions. Stainless steel offers considerable strength over other designs and with a requirement to handle vibration, prototypes of the new light undertook Military Specification vibration testing on a shaker table by an approved facility in Melbourne. Attached to an ARB bull bar the shaker table put both the light and bar through severe testing, with both the light and bar mounts resisting fatigue and passing the test. Further testing was then carried out to ensure the light was waterproof, with the light achieving a rating of IP68. IP ratings are an international code giving an Ingress Protection Rating and classifies in this case the level of protection given to an electrical enclosure. The ‘6Â’ in the code relates to solid particle protection and is the highest rating: Dust tight-No ingress of dust; complete protection against contact. The ‘8Â’ relates to liquid ingress protection and is also the highest rating: Immersion beyond 3.25 ft. - The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. To finish the outer surfaces of the light to ensure durability under the harshest conditions, the aluminium body is finished in a textured polyester powder coat that passes the ISO7253 3000 hour salt spray test. The lens retaining bezel is finished in a UV resistant red two pack automotive paint. This combined with the 304 stainless steel mount makes the ARB Intensity light extremely corrosion resistant. Performance of the light can only be described as intense and hence where it derives the name ‘ARB IntensityÂ’. At 6500K, the color temperature of the LEDs is as close to daylight as possible and with 32 LEDÂ’s per light producing a broad beam, even on spot versions the lights illuminate everything in the driverÂ’s forward field of view. No longer does the driver find themselves straining to see beyond the edge of the beam, hence reducing fatigue. ARB Intensity LED lights are sold separately as either a spot or flood beam. A new wiring loom has been developed that includes waterproof Deutsch DT-06 connectors and is available by ordering P/No 3500520.
    Add to Cart
    Quick view

    ARB Intensity LED Light - Flood Beam Pattern

    ARB

    $844.00
    These new Intensity LED lamps from ARB utilize a pressure die cast aluminum lightweight body that also acts as a heat sink where the removable LED circuit board containing 32 SMD LEDs mounts into the front face. The Hybrid Optics (reflector & lens) are...
    $844.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $844.00
    Subtotal:
    Add to Cart
  • Rock Jock 4x4 Aluminum AntiRock Swaybar Arms - 18 Inch - Pair
    Add to Cart
    Quick view

    RockJock® Aluminum Antirock® Swaybar Arms - 18 Inch - Pair - CE-9904-18

    RockJock 4x4

    $280.00
    18" billet aluminum Antirock® sway bar arms as used in our universal Antirock® sway bar kits are available separately for builders or as replacement parts. Arms are machined from 3/4" thick 6061T6 aluminum, making the weight on these arms just 1...
    $280.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $280.00
    Subtotal:
    Add to Cart
  • RockJock® 3 Inch Johnny Joint® Rebuild Kit - Includes 2 Bushing Halves, 2 Side Washers, and 1 Snap Ring
    Add to Cart
    Quick view

    RockJock® 3 Inch Johnny Joint® Rebuild Kit - Includes 2 Bushing Halves, 2 Side Washers, and 1 Snap Ring

    RockJock 4x4

    $60.00
    This 3" Johnny Joint® rebuild kit includes 2 urethane bushing halves, 2 side washers and 1 snap ring. NOTE: Bushings are 2.535" in diameter.
    $60.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $60.00
    Subtotal:
    Add to Cart
  • Genright Jeep JK ALuminum Dash & Center Console Kit
    Add to Cart
    Quick view

    Genright Jeep JK ALuminum Dash & Center Console Kit

    GenRight Off Road

    $1,999.99
    This Jeep JK Aluminum Dash & Center Console Kit is fully customize-able to suit whatever your needs may be. The entire dash bolts together (Hardware is included) with ease, and features blank inserts, so that you can cut them for whatever accessories...
    $1,999.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $1,999.99
    Subtotal:
    Add to Cart
  • Add to Cart
    Quick view

    VIAIR 98C Compressor Kit With Omega Style Mounting Bracket (10% Duty, Sealed)

    VIAIR

    MSRP: $134.64
    $94.25
    WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other productive harm.
    MSRP: $134.64
    $94.25
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $134.64
    $94.25
    Subtotal:
    Add to Cart
  • S&B Cold Air Intake for 2012-2017 Jeep Wrangler JK 3.6L (Dry Extendable Filter)
    Add to Cart
    Quick view

    S&B Cold Air Intake for 2012-2018 Jeep Wrangler JK 3.6L (Dry Extendable Filter)

    SB Filters

    $349.00
    Filter Type - Dry Filter Airflow Rating - 45.83% more air flow over stock intake Efficiency Rating - 99.74% efficient @ 325 CFM (ISO Coarse Dust) Weight - 12.0000 UPC - 841372035920 Street Legal In All US States - Yes CARB Exempt ID - D-590-11 Breathe...
    $349.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $349.00
    Subtotal:
    Add to Cart
  • RockJock® Universal Antirock® Kit - 32.0 Inch Bar - W/20 Inch Aluminum Arms
    Add to Cart
    Quick view

    RockJock® Universal Antirock® Kit - 32.0 Inch Bar - W/20 Inch Aluminum Arms

    RockJock 4x4

    $726.00
    Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 20" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH...
    $726.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $726.00
    Subtotal:
    Add to Cart
  • "Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market. Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. Premium Hardware: Premium stainless steel T-bolt clamps and a 2-ply reinforced silicone coupler at the throttle body is used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Proven Results: After a rigorous design and testing phase, the results are in. The Momentum GT intake system outflowed the factory intake by 47% and produces 12 additional horsepower and 11lbs. x ft. torque. Power, Protection and Simplicity. Patent Pending *Legal in California only for Racing Vehicles which may never be used upon a Highway."Stage-2 Si PRO 5R 360 Degree Radial Flow Air Filter 5-Layer Progressive Cotton Gauze Media Washable and Reusable A/F Huge 5" Flange w/Inverted Top A/F 2-Ply Reinforced Silicone Coupler Stainless Steel T-Bolt Clamps Auxiliary Air Scoop with Urethane Plug Unique Housing to Filter Interface (Patent Pending)
    Add to Cart
    Quick view

    aFe Power PRO 5R Air Intake System; Jeep Wrangler JK 12-13 V6-3.6L, Momentum GT

    AFE

    $446.25
    "Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in...
    $446.25
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $446.25
    Subtotal:
    Add to Cart
  • VIAIR Air Source Relocation Kit
    Add to Cart
    Quick view

    VIAIR Air Source Relocation Kit

    VIAIR

    MSRP: $35.36
    $24.75
    WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other productive harm.
    MSRP: $35.36
    $24.75
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $35.36
    $24.75
    Subtotal:
    Add to Cart
  • RockJock® Rear Bump Stop Kit
    Add to Cart
    Quick view

    RockJock® Rear Bump Stop Kit

    RockJock 4x4

    $146.00
    For 1997-2006 Jeep TJ's and Unlimited's. The only bump stop on the market that incorporates coil spring retainers. The bump stops extend stop impact point for proper contact. They are made with quality polyurethane components and aluminum spacers. The...
    $146.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $146.00
    Subtotal:
    Add to Cart
  • The Baja Low Back seat is a low back version of our ever-popular Baja SS Suspension Seat. This line of suspension seats is one of the most advanced suspension seats available today. The Baja Low Back Suspension Seat was designed for the off road enthusiast who wants the safety of suspension and the comfort of Corbeau. What makes this seat special is the option for an adjustable headrest. The Baja Low Back headrest not only adjusts up and down but will also adjust forward and back, assuring ultimate comfort both on and off road.. As a rule of thumb the Baja Low Back Seat will fit up to a 36-38 inch waist. The Baja Low Back Seat is available in vinyl and vinyl/cloth fabrics. The headrests are available in vinyl only. The headrest option is an additional $49.00 per seat and must be specified at the time of your order. If ordered without headrests, there will not be any headrest holes or grommets in the top of the seat.
    Add to Cart
    Quick view

    Baja Low Back Suspension Seat

    Corbeau

    $299.00
    The Baja Low Back seat is a low back version of our ever-popular Baja SS Suspension Seat. This line of suspension seats is one of the most advanced suspension seats available today. The Baja Low Back Suspension Seat was designed for the off road...
    $299.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $299.00
    Subtotal:
    Add to Cart
  • RockJock® Universal Antirock® Kit - 32.0 Inch Bar - W/18 Inch Aluminum Arms
    Add to Cart
    Quick view

    RockJock® Universal Antirock® Kit - 32.0 Inch Bar - W/18 Inch Aluminum Arms

    RockJock 4x4

    $726.00
    Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 18" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH...
    $726.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $726.00
    Subtotal:
    Add to Cart
  • RockJock® JK Front Lower Adjustable Control Arms with Johnny Joint®s - Pair
    Add to Cart
    Quick view

    RockJock® JK Front Lower Adjustable Control Arms with Johnny Joint®s - Pair

    RockJock 4x4

    $480.00
    These are the adjustable length Johnny Joint® front lower control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.625" o.d. x .250" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the...
    $480.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $480.00
    Subtotal:
    Add to Cart
  • S&B Cold Air Intake for 2012-2017 Jeep Wrangler JK 3.6L - 75-5060
    Add to Cart
    Quick view

    S&B Cold Air Intake for 2012-2017 Jeep Wrangler JK 3.6L - 75-5060

    SB Filters

    $349.00
    Filter Type - Cotton Filter Airflow Rating - 46.78% more air flow over stock intake Efficiency Rating - 99.46% efficient @ 325 CFM (ISO Coarse Dust) Weight - 13.0000 UPC - 841372033735 Quantity of Oil - 70 grams Oil Color - Red Street Legal In All US...
    $349.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $349.00
    Subtotal:
    Add to Cart
  • Two is always better than one, right? We think so, which is why weÂ’re offering a pair of XL-R Pro LED auxiliary lights with wiring harness for the price of $674.95. With a 4,300 lumen count and power draw of 42 watts, the XL-R Pro is the only single housing LED auxiliary light on the market that has the distance of an 8” HID with the smooth spread of an LED. Perfect for enthusiasts that need a vast amount of light and are looking for something other than a light bar. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.Includes:(2) XL-R Pro LED LightsMounting BracketsWiring HarnessPatterns:Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (10°) and Spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)
    Add to Cart
    Quick view

    Baja Designs XL-R Pro, Pair Driving/Combo LED - 53-7803

    Baja Designs

    MSRP: $689.95
    $679.95
    Two is always better than one, right?  We think so, which is why we’re offering a pair of XL-R Pro LED auxiliary lights with wiring harness for the price of $636.99.  With a 4,900 lumen count and a power draw of 40 watts per light, the...
    MSRP: $689.95
    $679.95
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $689.95
    $679.95
    Subtotal:
    Add to Cart
  • Currie Enterprises EZ Tire Deflator Pro
    Add to Cart
    Quick view

    Currie Enterprises EZ Tire Deflator Pro

    Currie Enterprises

    $40.00
    The Currie Digital EZ-Deflator is the next generation of tire deflator! This new unit allows you to quickly deflate large tires to very low pressures with superior accuracy. The innovative thread saver helps keep dirt and debris out of the tip to prevent...
    $40.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $40.00
    Subtotal:
    Add to Cart
  • RockJock® New Style Trac-Arm Relocator - Rear - Kit
    Add to Cart
    Quick view

    RockJock® New Style Trac-Arm Relocator - Rear - Kit

    RockJock 4x4

    $115.00
    New Currie trac bar relocator bracket - unlike other brackets on the market - features angle built into the top of the bracket to account for lifts. This keeps your Johnny Joints or bushings on the end of your trac bar in a neutral position - instead of...
    $115.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $115.00
    Subtotal:
    Add to Cart
  • RockJock® Universal Antirock® Kit - 32.0 Inch Bar - W/20 Inch Bent Steel Arms
    Add to Cart
    Quick view

    RockJock® Universal Antirock® Kit - 32.0 Inch Bar - W/20 Inch Bent Steel Arms

    RockJock 4x4

    $636.00
    Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 20" long steel arms with a 2" offset bend in them. Vertical links use a 14"...
    $636.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $636.00
    Subtotal:
    Add to Cart
  • RockJock® Brake Line Kit - Front or Rear (With No Rear Antirock® Swaybar) For JK Lift - (23.5 Inch) - Pair
    Add to Cart
    Quick view

    RockJock® Brake Line Kit - Front or Rear (With No Rear Antirock® Swaybar) For JK Lift - (23.5 Inch) - Pair

    RockJock 4x4

    $125.00
    This is the D.O.T. approved stainless braided extended brake line kit from the RockJock® JK off road suspension system. Kit fits the front when a front Antirock® sway bar kit is being installed or the stock front sway bar is being retained. Kit fits the...
    $125.00
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $125.00
    Subtotal:
    Add to Cart
  • TeraFlex TJ/LJ HD Gas Tank Skid Plate Kit - 4940071
    Add to Cart
    Quick view

    TeraFlex TJ/LJ HD Gas Tank Skid Plate Kit - 4940071

    Teraflex

    $460.99
    Protect your gas tank and increase ground clearance by 1” (requires: Body Lift Kit or Gas Tank Skid Plate Spacer Lowering Kit) with this complete replacement TJ: HD Gas Tank Skid Plate Kit. Fits: • TJ Wrangler (short wheelbase) • LJ...
    $460.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $460.99
    Subtotal:
    Add to Cart
  • Total: items /

Adding your products to cart

View Cart Continue Shopping