GenRight Off Road

GenRight JK Stubby Style Front Bumper FBB8040

SKU:
FBB8040
Availability:
Non Stocking Item- Lead Times Vary Based On Availability
Weight:
50.00 LBS
  • GenRight JK Stubby Style Front Bumper FBB8040
  • GenRight JK Stubby Style Front Bumper FBB8040
  • GenRight JK Stubby Style Front Bumper FBB8040
  • GenRight JK Stubby Style Front Bumper FBB8040
$949.99

Description

This is the Aluminum Stubby Front Bumper for the Jeep Wrangler JK from GenRight Off Road!
We call this model our "Stubby" front bumper because of it's small size and simple design (no bars).
Our high quality, high clearance Stubby type front bumper with a low profile (or recessed) winch mount. It is perfect for the guy who wants a clean and simple front bumper for their Jeep. The design incorporates the optional winch mount to keep the winch lower than most other bumpers to allow for better air flow to the radiator. However, if you are not planning to run a winch you can purchase our optional "winch delete" cover plate.


Other FEATURES Include:
  • Fits the 2 door and 4 door Jeep JK (2007 - current).
  • Compact design fits tight to the frame and wraps around each side.
  • Works with Antirock type sway bars (or the factory sway bar).
  • 12 bolt mounting fits tight up against the frame for the best approach angle.
  • Formed from lightweight 3/16" thick Aluminum alloy.
  • Includes two silver powder coated steel tow points (D-ring shackles are extra REC-2100).
  • No grille obstruction; the winch "tray" is pushed down into bumper (between frame rails) for optimal air flow to the radiator.
  • 100% Made in USA!
Options:
  • Optional: D-ring shackles are extra REC-2100 allows you to hook a tow strap to the FBB-6040.
  • Optional: Winch Delete (FBB-6020) necessary if you never plan to have a winch.

NOTES:

  • We now offer a winch delete, so you can cover the "hole" until you install a winch tray and winch!
  • This product is un-painted (except for the winch tray and tow points).
  • Aluminum fairlead is not included, but sold separately (FBB-5001).
  • *As of July 2013 running production changes now allow all new Warn; Zeon, 9.5 CTI and Power Plant winch(s) without any mods to bumper or winch tray.
  • Includes an extra bracket to remount the vacuum pump on the newer models.

Fits the 2 door and 4 door Jeep JK. Compact design fits tight to the frame and wraps around each side. Works with Antirock type sway bars (or the factory sway bar). 8 bolt mounting fits tight up against the frame for the best approach angle. Formed from lightweight 3/16" thick Aluminum alloy. Includes two steel tow points (D-ring shackles are extra REC-2100). No grille obstruction; the winch "tray" is sunken down into bumper (between frame rails) for optimal air flow to the radiator.

This product is un-painted (except for the winch tray and tow points). Aluminum fairlead is not included, but sold separately (FBB-5001). Because of the recessed winch tray a Warn 9.5TI winch can be made to fit with minor modifications and the Warn Power Plant winch can be made to fit with major mods.

View AllClose

Related Products

Related Products

The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat. NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper.
Choose Options
Quick view

Hanson JK Stubby Basic Front Bumper

Hanson

$869.00
The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. It’s handcrafted from 3/16”...