Adams Driveshafts

Adams Driveshaft JT Gladiator Overland Rear 1350 1 Piece CV Driveshaft [Extreme Duty Series]

SKU:
ASDJT-1350R-S-1PC-OVR
Availability:
Usually Ships within 2-4 days
Weight:
48.00 LBS
  • Adams Driveshaft JT Gladiator Overland Rear 1350 1 Piece CV Driveshaft [Extreme Duty Series]
  • Adams Driveshaft JT Gladiator Overland Rear 1350 1 Piece CV Driveshaft [Extreme Duty Series]
$1,049.95

Description

Looking for a extreme duty front CV driveshaft that is twice as strong as the factory version? Look no further than the Adams Driveshaft Jeep JT Gladiator Overland Rear 1350 1 Piece CV Driveshaft.

This custom made driveshaft is made out of 2" x .120 wall D.O.M tubing and features a heavy duty flange that fits your OEM pinion flange. The grade 10 CV bolts make it easier to install, and it is compatible with the Jeep JT Gladiator. Don't let a weak driveshaft stand in the way of your off-roading adventure - get the Adams Driveshaft Jeep JT Gladiator Overland Front 1350 CV Driveshaft today!

New 1 Piece Rear Extreme Duty Jeep JT Gladiator Overland 1350 Series CV Driveshaft. Custom made by Adams Driveshaft.

Now that you own the Newest Generation JT Gladiator, it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Application:

FITS A JEEP JT GLADIATOR OVERLAND ONLY.

This Extreme Duty Series 1 Piece Solid U-joint 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4 1/2" Lift, after that the angle may be too Severe and could cause a slight vibration on or off the Throttle.

Please enter Your Measurement, Year, Make, Model, and Lift Size in the notes when you check out, you can e-mail us, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.

PLEASE NOTE: THIS 1 PIECE DRIVESHAFT WILL NOT WORK ON ANY LONG ARM SUSPENSIONS OR ANY HIGH PINION DIFFERENTIALS. IF YOU HAVE A HIGH PINION, YOU WILL NEED TO GO WITH OUR 2 PIECE DESIGN.

Benefits for Buying an Adams Driveshaft over Others:

  • Rear Driveshaft Part# ASDJT-1350R-S-1PC-OVR
  • Made out of 3 1/2" X .083 Wall D.O.M. tubing.
  • Has Long 1 1/2" Full Spline Slip n Stub.
  • Built only with Components made by Spicer, Neapco, and Adams Driveshafts Brand.
  • Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint by Torque we replace it.
  • Comes with a Forged Rear U-bolt Style Dana 44 Overland Pinion Yoke that supports the U-joint Cap Half way around unlike our Competitors.
  • Comes with a Solid Steel Rear transfer case Saginaw Flange yoke with Grade 10 CV Bolts.

This Item will include the following parts as Pictured up Top:

  • [1] 3 12" X .083 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.
  • [1] American Made Rear 1350 Saginaw Transfer Case Output Shaft Flange Yoke.
  • [1] American Made Rear 1350 Forged Pinion Yoke.
  • [1] Set of 1350 U-bolts.
  • [4] Grade 10 CV bolts.
  • [1] Adams Driveshaft T-shirt

Driveshafts come painted Gloss Black Show Quality.

SINCE JEEP PRODUCED THIS MODEL WITH 2 DIFFERENT DIFFERENTIAL OPTIONS, WE NEED TO KNOW WHICH DIFFERENTIAL YOU HAVE BEFORE ORDERING.

BELOW IS A PICTURE OF AN M220:

m220-identifier-pic.jpg 

BELOW IS A PICTURE OF AN M200:

WE WILL NEED A MEASUREMENT LIKE THE PICTURE BELOW SHOWS WITH THE JEEP SITTING AT RIDE HEIGHT.


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.
View AllClose