Looking for a extreme duty front CV driveshaft that is twice as strong as the factory version? Look no further than the Adams Driveshaft Jeep JT Gladiator Sport Front 1350 CV Driveshaft.
This custom made driveshaft is made out of 2" x .120 wall D.O.M tubing and features a heavy duty flange that fits your OEM pinion flange. The grade 10 CV bolts make it easier to install, and it is compatible with the Jeep JT Gladiator. Don't let a weak driveshaft stand in the way of your off-roading adventure - get the Adams Driveshaft Jeep JT Gladiator Overland Front 1350 CV Driveshaft today!
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential or Axle Kit that Eliminates the [FAD] front axle disconnect and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.
FITS A JEEP JT GLADIATOR SPORT ONLY
This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 6" Lift after that the angle may be too Severe or it may Bind.
Please enter Your Measurement, Year, Make, Model, Rubicon or NON Rubicon and Lift Size in the notes when you check out, you can e-mail us, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
Benefits for Buying an Adams Driveshaft:
- Front Driveshaft Part# ASDJT-1350HRF-S-OEM-SP
- Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Has Long 1 1/2" Full Spline Slip n Stub unlike our Competitors that use a 1 3/8 Slip n Stub.
- Built only with Components made by Spicer and Neapco.
- Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
- Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't Disturb the Crush Sleeve.
- Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.
- This Item will include the following parts as Pictured up Top:
 2" X .120 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.
 American Made Front 1350 Half Round Transfer Case Output Shaft Yoke.
 Grade 10 CV bolts.
 Adams Driveshaft T-shirt
Driveshafts come painted Gloss Black Show Quality.
WE WILL NEED A MEASUREMENT LIKE THE PICTURE BELOW SHOWS WITH THE JEEP SITTING AT RIDE HEIGHT.