Description
System Benefits:
- Complete Bolt in System
- Excellent Highway Ride and Handling
- Greatly Improved Off-Road Ability
- High Clearance Lower Control Arms Front and Rear
- In Vehicle Adjustable Front Upper Arms
- Triple Rate Coil Springs
- PRO Front Sway Bar Disconnects/Extended Links
- PRO Rear Extended Sway Bar Links
- Repositions the Rear Axle Back up to 1" Over Stock
- 35" Tires (OEM Fenders)
- Up to 38" Tires (Flat Fenders)
- Abuse Proof Lifetime Warranty on All Hard Parts
- Upgradeable to any other Rock Krawler System
- (4) Triple rate coil springs
- (2) Adjustable 1.5 inch solid alloy steel front track bars
- (4) High clearance adjustable lower control arms made of 1.625" solid alloy steel
- (2) High misalignment double adjustable front upper control arms made from 1.25" solid alloy steel
- (2) High misalignment double adjustable rear upper control arms made from 1.25" solid alloy steel
- (2) Adjustable front sway bar disconnects
- (2) Rear extended sway bar links
- (1) Rear track bar relocation bracket
- (4) Long travel stainless steel brakes
- (1) Pair of sway bar straps
- (2) Rear coil spring degree wedges
RRD Spec'd Prodigy Shocks:
RRD Spec Front Shock
Part Number RRD02291
RRD Spec Rear Shock
Part Number RRD02292
*requires 3" bump stops both front and rear
RRD Spec'd TT Shocks:
RRD Spec Twin Tube Front Shock
Part Number RRD04000
RRD Spec Twin Tube Rear Shock
Part Number RRD04002
*requires 3" bump stops both front and rear
Bilstein 5100 Shocks:
| Bilstein Part # | Bump Stop | |
| Front | 24-186872 | 3" |
| Rear | 33-186887 | 3" |
or
Generic Front Shock
Recommendation with 3" bump stops - 17" Collapsed to 29" Extended
Generic Rear Shock
Recommendation with 3 " bump stops - 17" Collapsed to 27" Extended
- We typically recommend 4.5" of back spacing on rims for 33" and 35" tall tires.
- We typically recommend 3.5" of back spacing on rims for 37" tall tires.
- For 2012 and newer models an aftermarket front driveshaft with 2" O.D. steel tubing is recommended, but not required.
- The X Factor System allows the rear axle to be pushed back up to 1" over stock which perfectly centers the rear axle assembly under typical aftermarket flat fenders. It also allows for larger tires without contacting the rock sliders or rear pinch seam.
- We typically recommend 3.5" of back spacing on rims for 37" tall tires.
- For 2012 and newer models an aftermarket front driveshaft with 2" O.D. steel tubing is recommended, but not required.
- The X Factor System allows the rear axle to be pushed back up to 1" over stock which perfectly centers the rear axle assembly under typical aftermarket flat fenders. It also allows for larger tires without contacting the rock sliders or rear pinch seam.
