Currie Enterprises

Currie Enterprises

Currie Extreme 60 - Jeep JL Wrangler Rear Crate Axle

The Extreme 60 high-pinion rear crate axle is the strongest 60 series axle that we offer, designed for severe off-road use with up to 40-inch tires and V8 conversion horsepower Extreme 60...

Currie Enterprises

Currie 44 - Jeep JK Wrangler Front Crate Axle

The Currie® 44 high-pinion JK front crate axle is a direct bolt-in assembly with superior strength in a light-weight package that’s designed for heavy off-road use. Currie 44...

Currie Enterprises

Currie 44 - Jeep JK Wrangler Front Housing (Non-Rubicon)

The Currie® 44 heavy-duty high-pinion Jeep JK front housing delivers superior strength in a light-weight direct bolt-in package that’s designed for heavy off-road use. Built to the Currie...

Currie Enterprises

Currie 44 - Jeep JK Wrangler Front Housing (Rubicon Replacement)

The Currie® 44 heavy-duty high-pinion front housing is a direct replacement for the factory Jeep JK Rubicon unit (accepts stock Rubicon internals). With its strong reinforced center section,...

Currie Enterprises

Currie 44 - Jeep JK Wrangler Rear Crate Axle

The Currie® 44 JK rear crate axle is the perfect upgrade for JK owner looking to upgrade the strength and functionality of their JK’s rearend with a significantly stronger housing,...

Currie Enterprises

Currie 44 - Jeep JK Wrangler Replacement Rear Housing

Product Details: Low-Pinion Massively Reinforced Center Section Large-Diameter 3 in. x .375 in. Wall DOM Axle Tubes Heavy-Duty 3/16 in. Laser Cut Brackets Requires Standard Aftermarket JK 44...

Currie Enterprises

Currie 60 - Jeep JK Wrangler Front Crate Axle

The Currie® 60 high pinion front axle includes a long list of exclusive features and innovation that make it the clear choice for serious off-road adventure. The Currie 60 is built around our...

Currie Enterprises

Currie 60 - Jeep JK Wrangler Rear Crate Axle

The Currie® 60 high pinion rear axle includes a long list of exclusive features and innovation that make it the clear choice for serious off-road adventure. The Currie 60 is built around our high...

Currie Enterprises

Currie 70 - Jeep JK Wrangler Front Crate Axle

The Currie 70 is simply the strongest high-pinion crate axle available, designed handle extreme off-road use and performance V8 horsepower without breaking a sweat. If you're building a serious rock...

Currie Enterprises

Currie 70 - Jeep JK Wrangler Rear Crate Axle

The Currie 70 high-pinion, full-floating rear crate axle is simply the strongest high-pinion rear axle available, designed for extreme off-road use with 40+ inch tires and performance V8 horsepower...

Currie Enterprises

Currie 70 - Jeep JL Wrangler Front Crate Axle

The Currie 70 is simply the strongest high-pinion crate axle available, designed handle extreme off-road use and performance V8 horsepower without breaking a sweat. If you're building a serious rock...

Currie Enterprises

Currie 70 - Jeep JL Wrangler Rear Crate Axle

The Currie 70 high-pinion, full-floating rear crate axle is simply the strongest high-pinion rear axle available, designed for extreme off-road use with 40+ inch tires and performance V8 horsepower...

Currie Enterprises

Currie Complete Heavy Duty Tie Rod and Drag Link System

The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1 ¼" diameter forged alloy drag link, and 1 ¼" solid alloy steel tie rod bar that is bored...

Currie Enterprises

Currie Enterprises - 87-95 Front HD Shackles w/o Tow Bar Attachment

For 1987-1995 Jeep YJ's - equipped with Pro Comp springs. Replaces stock shackles with our heavy duty units that feature 1/4" thick steel side plates, Energy Suspension "Tough 88" fluted urethane...

Currie Enterprises

Currie Enterprises - 97-06 Jeep Wrangler TJ (SWB) and 04-06 Wrangler Unlimited LJ (LWB) Suspension System W/ Antirock - Double Adjustable Upper Arms - No Shocks - No Springs

Currie Enterprises

Currie Enterprises - Front Shackles - Pair (YJ 87-95)

Currie Enterprises

Currie Enterprises 04-06 Jeep Wrangler Unlimited / LJ - Suspension System W/ Antirock - No Shocks

The Currie Johnny Joint® suspension system kit is a complete package that replaces all eight stock control arms and provides a 4" lift. It is engineered to provide unrivaled articulating flexibility...

Currie Enterprises

Currie Enterprises 04-06 Jeep Wrangler Unlimited / LJ - Suspsension System With Swaybar Disconnects - No Shocks

The Currie Johnny Joint® suspension system kit is a complete package that replaces all eight stock control arms and provides a 4" lift. It is engineered to provide unrivaled articulating flexibility...

Currie Enterprises

Currie Enterprises 04-06 Jeep Wrangler Unlimited / LJ Suspension System W/ Antirock Double Adjustable Upper Arms - No Shocks

The Currie Johnny Joint® suspension system kit is a complete package that replaces all eight stock control arms and provides a 4" lift. It is engineered to provide unrivaled articulating flexibility...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler (JK) Ssspension System **2DR** W/Front Swaybar Links and Rear Antirock W.Aluminum Arms - No Shocks - Kit

The RockJock® 4" Off Road Suspension System for the 2-door JK allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 2 door Jeep JK Wranglers. Kit allows for...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler (JK) Suspension **2DR** With F/R Adjustable Swaybar Links - Kit

The RockJock® JK off road suspension system allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 2 door Jeep JK Wranglers. Kit allows for up to 11" of rear...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler (JK) Suspension System **2DR** Includes Front and Rear Track Bars and Antirocks With Aluminum Mount and Arms

The RockJock® 4" Off Road Suspension System for the 2-door JK allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 2 door Jeep JK Wranglers. Kit allows...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler (JK) Suspension System **2DR** Includes Springs, Upper Adjustable Arms, Brake Line Bracket, Trackbar Relocation, P/A, Rear Swaybar Links, F/R Bumpstops

The RockJock® JK 4" Standard Off Road Suspension System for any model of the 2-door Jeep JK Wrangler is a cost effective alternative to our full kit. This kit includes 4” lift front and rear coil...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler (JK) Suspension System **2DR** With Front Swaybar Links and Rear Antirock W/Steel Arms - No Shocks - Kit

The RockJock® 4" Off Road Suspension System for the 2-door JK allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 2 door Jeep JK Wranglers. Kit allows...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler (JKU) Suspension System **4DR** Includes Srings, Upper Adjustable Arms, Brake Line Brakcet, T/B Relocation, P/A, Rear Swaybar Links, F/R Bumps

The RockJock® JK 4" Standard Off Road Suspension System for any model of the 4-door Jeep JK Wrangler is a cost effective alternative to our full kit. This kit includes 4” lift front and rear coil...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler Unlimited (JK) **4DR** W/ Front Swaybar Links and Rear Antirock W/ Steel Arms - No Shocks - Kit

The RockJock® 4" Off Road Suspension System for the 4-door JK allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 4 door Jeep JK Wranglers. Kit allows for...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler Unlimited (JK) Suspension System **4DR** W/F&R Adjustable Swaybar Links - No Shocks - Kit

The RockJock® JK off road suspension system allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 4 door Jeep JK Wranglers. Kit allows for up to 11" of rear...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler Unlimited (JK) Suspension System **4DR** W/F&R Antirocks with Aluminum Mount and Arms - Includes Front & Rear Track Bars

The RockJock® 4" Off Road Suspension System for the 4-door JK allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 4 door Jeep JK Wranglers. Kit allows for...

Currie Enterprises

Currie Enterprises 07-13 Jeep Wrangler Unlimited (JK) Suspension System **4DR** W/Front Swaybar Links and Rear Antirock W/ Aluminum Arms - No Shocks - Kit

The RockJock® 4" Off Road Suspension System for the 4-door JK allows for efficient clearance of up to 37" tall tires (with minor trimming) on any model of the 4 door Jeep JK Wranglers. Kit allows for...

Currie Enterprises

Currie Enterprises 1 Inch Body Lift YJ and TJ

1" body lift for 1987-2006 Jeep YJ and TJ Wranglers, as well as LJ Unlimiteds allows for additional tall tire clearance without exceeding practical suspension lift heights. The Currie billet aluminum...

Currie Enterprises

Currie Enterprises 1.25-12 LH Jamnut

1 1/4"-12 left hand thread jam nut for use on Currie CE-9114L Johnny Joints® with treaded shanks, or in any other application that would need a 1 1/4" jam nut. Silver zinc plated.

Currie Enterprises

Currie Enterprises 1.25-12 RH Jamnut

Currie Enterprises

Currie Enterprises 2 Inch Johnny Joint (Barrel Style) W/ 7/16 Grease Bolt - With Machined Sleeve For CE - 9102K

This is the specially machined Johnny Joint® rod end out of our CE-9102K front end housing kit. This joint's outer shell is machined to 1.795" o.d. with a flanged edge and is designed to be driven...

Currie Enterprises

Currie Enterprises 2 Inch Johnny Joint W 1/2 Greasable Bolt - With Machine Outer Sleeve For CE-9102K

This is the specially machined Johnny Joint® rod end out of our CE-9102K front end housing kit. This joint's outer shell is machined to 1.795" o.d. with a flanged edge and is designed to be driven...

Currie Enterprises

Currie Enterprises 2.0 JJ - Externally Greased - W/ 0.437 Hole X 2.00 OAW - Not Cross Drilled

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 JJ - Externally Greased - W/ 0.482 Hole X 2.18 OAW - Not Cross Drilled - W/O Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 JJ - Externally Greased - W/ 0.500 Hole X 2.00 OAW - Not Cross Drilled - W/O Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 JJ - Internally Greased - W/0.437 Hole X 2.oo OAW - Cross Drilled W/ Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 JJ - Internally Greased - W/0.500 Hole X 2.00 OAW - Cross Drilled W/ Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X .75-16 RH, W/ -12 Ball (0.500 Hole X 2.0 OAW) - No Bolt

All new from Currie, forged Johnny Joints®!!! We have taken the Johnny Joint® to the next level by making a male rod end style forging that accepts the Johnny Joint® internals from our CE-9112 2"...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X .75-16 RH, W/ 11 Ball (0.482 Hole X 2.190 OAW) - Each

All new from Currie, forged Johnny Joints®!!! We have taken the Johnny Joint® to the next level by making a male rod end style forging that accepts the Johnny Joint® internals from our CE-9112 2"...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X .75-16 RH, W/ 12 Ball (0.500 Hole X 2.0 OAW) - Each

All new from Currie, forged Johnny Joints®!!! We have taken the Johnny Joint® to the next level by making a male rod end style forging that accepts the Johnny Joint® internals from our CE-9112 2"...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X .75-16 RH, W/ Standard Ball (0.437 Hole X 2.00 OAW), No Bolt

All new from Currie, forged Johnny Joints®!!! We have taken the Johnny Joint® to the next level by making a male rod end style forging that accepts the Johnny Joint® internals from our CE-9112 2"...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 LH, Narrow Body W/ 0.437 Hole X 2.0 OAW, No Bolt

This narrow 2" Johnny Joint® is a male rod end style forging that features a .437" thru bolt hole, a 2" mounting width, 2 1/4" of 1"-14 left hand threads on the shank, and is greasable through the...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 RH, Narrow Body W/ Standard Ball (0.437 Hole X 2.0 OAW), No Bolt

This narrow 2" Johnny Joint® is a male rod end style forging that features a .437" thru bolt hole, a 2" mounting width, 2 1/4" of 1"-14 right hand threads on the shank, and is greasable through the...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 RH, Narrow Body, W/-11 Ball (0.482 Hole x 2.190 OAW) - w/o Bolt

The 2" narrow forged Johnny Joint® rod end was designed originally for use in our JK front and rear trac bars, however, it is now available seperately as a replacement part or for use in any type of...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 RH, Narrow Body, W/-12 Ball (0.500 Hole x 2.00 OAW) - w/o Bolt

This narrow 2" forged Johnny Joint® is a male rod end that accepts Johnny Joint® internals that are unique to this narrow joint. This version features a one piece high performance bushing, .625" thru...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 RH, Narrow Body, W/-13 Ball (0.562 Hole x 1.600 OAW) - w/o Bolt

This narrow 2" forged Johnny Joint® is a male rod end that accepts Johnny Joint® internals that are unique to this narrow joint. This version features a one piece high performance bushing, .625" thru...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 RH, Narrow Body, W/-14 Ball (0.625 Hole x 1.600 OAW) - w/o Bolt

This narrow 2" forged Johnny Joint® is a male rod end that accepts Johnny Joint® internals that are unique to this narrow joint. This version features a one piece high performance bushing, .625" thru...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 1.00-14 RH, Narrow Body, W/-15 Ball (0.480 Hole x 1.600 OAW) - w/o Bolt

This narrow 2" forged Johnny Joint® is a male rod end that accepts Johnny Joint® internals that are unique to this narrow joint. This version features a one piece high performance bushing, .480" thru...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 3/4-16 RH, Narrow Body, W/-12 Ball (0.500 Hole X 2.00 OAW) W/O Bolt

The all new narrow 2" forged Johnny Joint® is a male rod end style forging that accepts Johnny Joint® internals that are unique to this narrow joint and may be used in any type of universal...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 3/4-16 RH, Narrow Body, W/-13 Ball (0.562 Hole X 2.00 OAW) W/O Bolt

The all new narrow 2" forged Johnny Joint® is a male rod end style forging that accepts Johnny Joint® internals that are unique to this narrow joint and may be used in any type of universal...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End x 3/4-16 RH, Narrow Body, W/-14 Ball (0.625 Hole x 1.600 OAW) - W/O Bolt

The all new narrow 2" forged Johnny Joint® is a male rod end style forging that accepts Johnny Joint® internals that are unique to this narrow joint and may be used in any type of universal...

Currie Enterprises

Currie Enterprises 2.0 JJ Forged End X 7/8-18 LH, Narrow Body, W/-13 Ball (0.562 Hole X 1.600 OAW) - W/O Bolt

This narrow forged 2" Johnny Joint® rod end features forged steel construction, a 7/8"-14 left hand threaded shank and comes fully assembled with 1.600" wide ball center with a 9/16" thru bolt hole...

Currie Enterprises

Currie Enterprises 2.0 JJ Rebuild Kit - Includes 2 Bushing Halves, 2 Side Washers, and 1 Snap Ring

This 2" Johnny Joint® rebuild kit includes 2 urethane bushing halves, 2 side washers and 1 snap ring. NOTE: Bushings are 1 5/8" in diameter.

Currie Enterprises

Currie Enterprises 2.0 Narrow JJ - Externally Greased - W/-12 Ball (0.500 HOLE X 2.00 OAW) - Not Crossdrilled - W/O Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 Narrow JJ - Externally Greased - W/-13 Ball (0.562 HOLE X 1.600 OAW) - Not Crossdrilled - W/O Bolt, Narrow Body Shell

Currie Enterprises

Currie Enterprises 2.0 Narrow JJ - Externally Greased - W/-14 Ball (0.625 Hole X 1.600 OAW) - Not Cross Drilled W/O Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 Narrow JJ - Externally Greased - W/.480 Hole X 1.600 OAW Ball - Not Crossdrilled - W/O Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.0 Narrow Johnny Joint Rebuild Kit - Includes 1 Bushing, 2 Side Washers, and 1 Snap Ring

This narrow style 2" Johnny Joint® rebuild kit includes 1 urethane bushing, 2 side washers and 1 snap ring. NOTE: Bushing is 1 5/8" in diameter.

Currie Enterprises

Currie Enterprises 2.5 Inch Billet 4140 Narrow Johnny Joint W/1.25-12 RH Thread - With -9 Ball Center 0.562 Hole 2.625 OAW - Each

Narrow style billet Johnny Joint® rod ends feature 40 degrees of overall articulation travel! A Currie exclusive! These joints are CNC machined 4140 chrome moly, with a 1 5/8" wide body, 1 1/4"-12...

Currie Enterprises

Currie Enterprises 2.5 Inch Billet Johnny Joint W/1.25-12 LH Thread - With Standard Ball - Each

Billet Johnny Joint® rod ends feature CNC machined 4140 chrome moly construction, a 1 1/4"-12 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide...

Currie Enterprises

Currie Enterprises 2.5 Inch Billet Johnny Joint W/1.25-12 RH Thread - With Standard Ball - Each

Billet Johnny Joint® rod ends feature CNC machined 4140 chrome moly construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide...

Currie Enterprises

Currie Enterprises 2.5 Inch Johnny Joint W/1.25-12 LH Thread - Narrow W -9 Ball Center 0.562 Hole X 2.625 OAW - Each

Narrow style billet Johnny Joint® rod ends feature 40 degrees of overall articulation travel! A Currie exclusive! These joints are CNC machined 4140 chrome moly, with a 1 5/8" wide body, 1 1/4"-12...

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally Greased - W/ -20 Ball (0.718 Hole X 2.590 OAW) - W/O Bolt - Each

This 2 1/2" Johnny Joint® rebuild kit includes 2 urethane bushing halves, 2 side washers and 1 snap ring. NOTE: Bushings are 2 3/16" in diameter.

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally greased - W/12 Ball (0.515 Hole x 2.440 OAW) - w/o Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally greased - W/14 Ball (0.562 Hole x 2.365 OAW OFFSET) - w/o Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally greased - W/17 Ball (0.572 Hole x 3.150 OAW) - w/o Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally greased - W/19 Ball (0.640 Hole x 2.585 OAW) - w/o Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally Greased - W/Chromoly Barrel and STD Ball (0.562 Hole x 2.625 OAW) - W/Bolt - Each

Currie's weld-on Johnny Joint® rod ends for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint...

Currie Enterprises

Currie Enterprises 2.5 JJ - Externally greased - W/Standard Ball (0.562 Hole x 2.625 OAW) - w/o Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - w/ 12 Ball - Cross Drilled (0.515 Hole x 2.440 OAW) - w/Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - w/ 14 Ball - Cross Drilled (0.562 Hole x 2.365 OAW Offset) - w/Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - w/ 15 Ball - Cross Drilled (0.570 Hole x 2.368 OAW Offset) - w/Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - w/ 18 Ball - Cross Drilled (0.625 Hole x 2.368 OAW Offset) - w/Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - w/ 26 Ball - Cross Drilled (0.625 Hole x 2.625 OAW Offset) - w/Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - w/.562 Hole x 2.625 OAW - W/Grease Bolt - Each

For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in...

Currie Enterprises

Currie Enterprises 2.5 JJ - Internally Greased - W/Chromoly Barrel and Crossdrilled (0.562 Hole x 2.625 OAW) - W/Grease Bolt - Each

Currie's weld-on Johnny Joint® rod ends for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 LH Forged End - With 91102GM Ball Center (0.515 Hole X 2.440 OAW) - No Bolt - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.440" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 LH, Narrow Body W/ Standard (0.562 Hole X 2.625 OAW), No Bolt

Forged narrow body Johnny Joint® rod ends feature forged steel construction, a 1"-14 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 LH, Standard Ball (0.562 Hole X 2.625 OAW), No Bolt

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with a...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 LH, W/-14 Ball (0.562 Hole X 2.365 OAW, OFFSET) Use on JK Rear Top Arm

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.365" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 LH, W/-19 Ball (0.640 Hole X 2.585 OAW) - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.585" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 LH, W/-26 Ball (0.625 Hole X 2.625 OAW) - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.0-14 RH, Narrow Body W/ Standard (0.562 Hole X 2.625 OAW), No Bolt

Forged narrow body Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.00-14 RH Forged End - With 0.515 Hole X 2.440 OAW - No Bolt - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.440" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ x 1.00-14 RH, W/-14 Ball (0.562 Hole X 2.365 OAW, OFFSET) - Use on JK Rear Top Arm, No Bolt

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.365" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.00-14 RH, W/-19 Ball (0.640 Hole X 2.585 OAW) - EACH

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.585" wide ball center with a ...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.00-14 RH, W/-26 Ball (0.625 Hole X 2.625 OAW) - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with a...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.00-14 RH, W/-27 Ball (0.718 Hole X 2.375 OAW) - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.375" wide ball center with a...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.00-14 RH, W/Standard (0.562 Hole X 2.625 OAW), No Bolt

Forged Johnny Joint® rod ends feature forged steel construction, a 1"-14 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with a...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25 RH, W/ -14 Ball (0.562 Hole X 2.365 OAW, OFFSET)

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.365" wide ball center with...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25 RH, W/ -19 Ball (0.640 Hole X 2.585 OAW)

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25 RH, W/ -20 Ball (0.718 Hole X 2.590 OAW) - 18MM - Each

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.590" wide ball center with...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25 RH, W/ -21 Ball (0.718 Hole X 3.280 OAW)

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (3.280" wide ball center with...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25 RH, W/ -22 Ball (0.750 Hole X 2.812 OAW)

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.812" wide ball center...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25-12 LH, W/ -14 Ball (0.562 Hole X 2.365 OAW, OFFSET)

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.365" wide ball center with...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25-12 LH, W/ -19 Ball (0.640 Hole X 2.585 OAW)

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.585" wide ball center with...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25-12 LH, W/ Standard Ball (0.562 Hole X 2.625 OAW), No Bolt

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 left hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with...

Currie Enterprises

Currie Enterprises 2.5 JJ X 1.25-12 RH, W/Standard Ball (0.562 Hole X 2.625 OAW), No Bolt

Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with...