G2 Axle & Gear

G2 Axle & Gear

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • G2 Gear & Axle JK Metric Core 44 Rear With 4.88 Ratio and Placer 35 Spline ARB Air Locker
    Add to Cart
    Quick view

    G2 Gear & Axle JK Metric Core 44 Rear With 4.88 Ratio and Placer 35 Spline ARB Air Locker

    G2 Axle & Gear

    $3,799.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,799.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,799.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Rear With 4.56 Ratio and Placer 32 Spline Detroit True Trac
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 4.56 Ratio and Placer 32 Spline Detroit True Trac

    G2 Axle & Gear

    $3,399.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,399.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,399.99
    Subtotal:
    Add to Cart
  • Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 4.56 Ratio and 32 Spline Detroit True Trac

    G2 Axle & Gear

    $2,999.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $2,999.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $2,999.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Rear With 4.56 Ratio and Placer 35 Spline Auburn Ected
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 4.56 Ratio and Placer 35 Spline Auburn Ected

    G2 Axle & Gear

    $3,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,499.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Metric Core 44 Rear With 4.56 Ratio and Placer 35 Spline ARB Air Locker
    Add to Cart
    Quick view

    G2 Gear & Axle JK Metric Core 44 Rear With 4.56 Ratio and Placer 35 Spline ARB Air Locker

    G2 Axle & Gear

    $3,799.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,799.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,799.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Front With 5.38 Ratio and 35 Spline Auburn Ected
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 5.38 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Front With 5.38 Ration and 35 Spline ARB Air Locker
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 5.38 Ration and 35 Spline ARB Air Locker

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Front With 5.13 Ratio and 35 Spline Auburn Ected
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 5.13 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Front With 5.13 Ratio and 35 Spline ARB Air Locker
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 5.13 Ratio and 35 Spline ARB Air Locker

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Front With 4.88 Ratio and 35 Spline Auburn Ected
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 4.88 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Gear & Axle JK Core 44 Front With 4.88 Ration and 35 Spline ARB Air Locker
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 4.88 Ration and 35 Spline ARB Air Locker

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 Placer Gold USA made 35 spline Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 4.56 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yokeStandard axle caster for 0-4 inch liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 4.56 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 Placer Gold USA made 35 spline Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 4.56 gear ratio and ARB Air LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yokeStandard axle caster for 0-4 inch liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Front With 4.56 Ratio and 35 Spline ARB Air Locker

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 5.38 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHaevy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3Degrees extra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Lifted Front With 5.38 Ratio and 35 SPline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 5.13 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3 Degrees extra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Lifted Front With 5.13 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 5.13 gear ratio and ARB Air LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3 Degrees extra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Lifted Front With 5.13 Ratio and 35 Spline ARB Air Locker

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 4.88 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3 Degrees extra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Lifted Front With 4.88 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,299.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This...
    $4,299.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,299.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 4.88 gear ratio and ARB Air LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3 Degrees extra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Lifted Front With 4.88 Ratio and 35 Spline ARB Air Locker

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 4.56 gear ratio and ARB Air LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3 Degrees etra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Lifted Front With 4.56 Ratio and 35 Spline Auburn Ected

    G2 Axle & Gear

    $4,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This...
    $4,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $4,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.38 gear ratio and Detroit True TracUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 32 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 5.38 Ratio and Placer 32 Spline Detroit True Trac

    G2 Axle & Gear

    $3,399.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,399.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,399.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.38 gear ratio and Detroit LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft4340 Chromalloy 32 spline axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 5.38 Ratio and 32 Spline Detroit True Trac

    G2 Axle & Gear

    $2,999.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $2,999.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $2,999.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.38 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 35 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 5.38 Ratio and Placer 35 Spline Auburn Ected

    G2 Axle & Gear

    $3,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.38 gear ratio and ARB Air LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 35 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Metric Core 44 Rear With 5.38 Ratio and Placer 35 Spline ARB Air Locker

    G2 Axle & Gear

    $3,799.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,799.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,799.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.13 gear ratio and Detroit True TracUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 32 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 5.13 Ratio and Placer 32 Spline Detroit True Trac

    G2 Axle & Gear

    $3,399.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,399.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,399.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.13 gear ratio and Detroit LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft4340 Chromalloy 32 spline axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 5.13 Ratio and 32 Spline Detroit True Trac

    G2 Axle & Gear

    $2,999.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $2,999.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $2,999.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.13 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 35 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 5.13 Ratio and Placer 35 Spline Auburn Ected

    G2 Axle & Gear

    $3,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,499.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 5.13 gear ratio and ARB Air LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 35 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Metric Core 44 Rear With 5.13 Ratio and Placer 35 Spline ARB Air Locker

    G2 Axle & Gear

    $3,799.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,799.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,799.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 4.88 gear ratio and Detroit True TracUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 32 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 4.88 Ratio and Placer 32 Spline Detroit True Trac

    G2 Axle & Gear

    $3,399.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,399.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,399.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 4.88 gear ratio and Detroit LockerUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft4340 Chromalloy 32 spline axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 4.88 Ratio and 32 Spline Detroit True Trac

    G2 Axle & Gear

    $2,999.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $2,999.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $2,999.99
    Subtotal:
    Add to Cart
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available.Technical DetailsJk Rear with 4.88 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 35 spline Placer axle shaftsFactory style flange pinion yokeIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
    Add to Cart
    Quick view

    G2 Gear & Axle JK Core 44 Rear With 4.88 Ratio and Placer 35 Spline Auburn Ected

    G2 Axle & Gear

    $3,499.99
    G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8" gear design, we have developed a...
    $3,499.99
    Add to Cart Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    $3,499.99
    Subtotal:
    Add to Cart
  • Total: items /

Adding your products to cart

View Cart Continue Shopping