FACTOR 55

Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount

SKU:
F55-FOLDABLEFLATLINK
Availability:
Non Stocking Item- Lead Times Vary Based On Availability
Weight:
6.00 LBS
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
  • Factor 55 Foldable Flatlink Multimount Winch Line Shackle Mount
$229.00

Description

Factor 55's Foldable Flatlink Multimount replaces conventional Winch Line Shackle Mounts and winch hooks with a safer more secure shackle attachment point to aide in safer, more effective winch recoveries. The factor 55 multimount has a built in multi shackle interface for bridle and off-camber winch recovery, making riggin up your recovery much easier.

Like all other Factor 55 products, the foldable flatlink uses CNC machined aluminum, and fits cable diameters up 3/8" thick, and utilizes a shank pin of 3/4" in diameter. With a max load of 16,000lbs capacity and an ultimate load of 40,000, factor 55 has most any vehicle covered on the trail.

  • Lightweight - Precision CNC machined 6000 series aluminum
  • No splicing required - titanium double shear pin design
  • Designed for both steel cables and synthetic winch ropes
  • Integrated EPDM rubber pads for fairlead protection
  • Foldable-1.75 inch thick (Compatible with all fairlead license plate mounting brackets)
  • For rope and cable diameters up to 3/8 inch
  • Fits multiple 3/4 inch screw pin shackles
  • Oval Hole opening connects to either the pin or bow end of common 3/4 inch screw pin shackles
  • Oval Hole opening connects to the pin ends of 7/8 inch and 1inch screw pin shackles
  • Fits over most OEM tow hooks
  • Warning: Keep forces in line. Do Not Side Load Shackle
  • Available in Military Specification Anodizing (Mil-A-8625 F Type III) Gray and powder coated finishes
  • 5/8 inch diameter 6AI-4V titanium double shear pin
  • Max Load: 16,000 pounds
  • Ultimate Strength: 40,000 pounds
  • Weight: 30oz
  • Made in USA
View AllClose

Related Products

Related Products

Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Red

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Blue

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Black

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Gray

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Silver

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...