Mounts

Did your Gladiator not come from the factory with a set of three bed rails? We have ya covered with our HD Bed Rails! Not only do they cost less than ordering from Jeep, but they are much more durable and have a higher load carrying capability. These...

The Rebel Off Road XPLOR Rack Rooftop Tent Standoff Brackets can be installed to raise your oversized Rooftop above the roofline so it doesnt make contact while the body/frame of your Gladiator is flexing. Stand off brackets can also enable you to mount...

Our COMM-LHT mount is perfect for attaching communications antennas or area lights to your XPLOR Rack. This mount can be installed in the front or rear of the XPLOR Rack using the already supplied carriage bolts. On the Half Rack we don't suggest...

With the Rebel Off Road XPLOR no-drill Fridge Slide Mount, you can enjoy the ultimate convenience of bringing your 12V fridge on your next off-road excursion. Specific to Jeep Gladiators, this innovative mounting solution securely attaches your fridge...

The Rebel Off Road XPLOR Rooftop Tent Cross Bar Mounting System allows for a universal mounting system for all rooftop tents. The cross bars mount directly to the top chanels of the XPLOR bed rack and include all necessary mounting hardware to mount both...

Introducing the Rebel Off Road Table Mount and Heavy Duty 4-Foot Folding Plastic Table Discover the practicality and effectiveness of our XPLOR Bed Rack Table Holder, custom-made to accommodate a 4-Foot granite White Plastic Collapsible Table. Our table...

The Rotopax locking handles unique designs adds strength and provides extra tightening power. Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top. (We do not carry spare keys. We...

Rebel Off Road is excited to offer our new bike mount for our XPLOR Full and Half height Racks. The mount will attach to your existing Flat Carrier Plates from behind and is fully adjustable to your bikes height and width. This allows for compatibility...

Introducing the Aluminum Carrier Plate 2.0 - a newly designed, lightweight aluminum panel for our XPLOR bed rack for the Jeep Gladiator and Toyota Tacoma. This upgraded carrier plate is lighter, more versatile, and ready to support your adventure needs...

The Stow It has been designed to provide the most secure load carrying solution for all shovels, spades, paddles, axes, fishing rods and more. The Stow It is compatible with Rhino-Rack’s most popular systems – the Pioneer Platforms, Vortex...

Enhance your Jeep Gladiator's utility with the Rebel Off Road XPLOR Bed Rack Inner Stand Off Bracket, designed to mount carrier plates to the inside of our XCAP Bed Rack Enclosure System. These robust brackets serve as the perfect mounting point for our...

Improve your XPLOR Bed racks functionality with the Molle Accessory Nut Kit, designed specifically for seamless integration with the aluminum Rebel Off Road Molle Panel. This kit is a game-changer for enthusiasts who demand both functionality and ease of...

Our new adult beverage bottle cap extraction device mounts up either on the outside or inside of your XPLOR Half Height or XPLOR Full Height Bed Rack. Made of stainless steel, wire brushed by the handsome gentlemen at Rebel Off Road, and includes black...

A great solution for carrying a camp table under your Jeep Gladiator Xplor Bed Rack. Our table mount tucks your 4-Foot Granite White Plastic Folding Table up underneath your rack, securely. Metal fasteners keep your table snug and secure. Simply pull the...

The Rotopax DLX (Deluxe) Pack Mounts Unique designs adds strength and provides extra tightening power due to its dual handles. Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top...

The Rotopax Standard Pack Mount is the quickest, strongest way to mount your RotopaX. The RotoPAX Standard Pack Mount is intended to be used with the included base plate, or by removing the plate to attach the mount directly, by bolting up through the...

The Rotopax locking handles unique designs adds strength and provides extra tightening power. Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top. (We do not carry spare keys. We...

The BKT-2285 Power Tank Propane Tank Bracket is a heavy duty stainless steel bracket designed to fit the 5 Lb Manchester 1.2 Gallon LP Bottle. This bracket fits 8 Inch Diameter tanks and designed to install on any flat surface. The 5Lb propane tank is...

Looking to Mount accessories such as shovels, axes & jacks to your vehicles sliding cargo rail? Our Quick Fist/T nut combo provides all you need to mount 2 quick fist mounts to your Jeep Gladiator JT's sliding bed rail. Includes: 2X Quick Fist...

The Rebel Off Road Spare Tire Relocation Bracket is a must have for the XPLOR Bed rack owner looking to carry an oversized spare tire onboard without crowding the bed. By relocating your oversized spare tire, you immediately gain ground clearance under...

• Holds objects 1" to 2.25" (25 to 57mm) in diameter.• Each clamp supports a safe working load of 25lbs (11 kilos).• 2 clamps support 50lbs (23 kilos).• Mounts easily with one #10 bolt or screw.• Mounting area: 2 1/2" x 3/4"...

Our new Aluminum Top Channel 2.0 brackets have been manufatured in a lightweight aluminum material, made to lighten the weight of your XPLOR bed rack. The XPLOR top channels can be mounted anywhere on the XPLOR bed racks. Typically they're used to mount...

The TRED Quick Release Mounting Kit makes installing a recovery board to your vehicle or trailer a breeze. The combo of TRED Mounting Baseplate and TRED Quick Release Pins with a ratchet handle design allows for quicker and more user-friendly operation...

Enhance your Jeep Gladiator's utility with the Rebel Off Road XPLOR Bed Rack Outer Stand Off Bracket, designed exclusively for our XCAP Bed Rack Enclosure System. These robust brackets serve as the perfect mounting point for our carrier plates,...

The Headache Rack attaches directly to the Half Height XPLOR Rack crossbars, positioned behind your Gladiator's rear window. This addition enhances safety and protects your vehicle from any loose cargo in the back — especially important since the...

The Rhino-Rack Folding Aerial Bracket is designed with versatility in mind offering 180 degrees of rotation for aerials, antennas, flags, small LEDs and spotlights. The bracket can be installed to roof racks and Pioneer systems and using a C-channel...

Rugged, high grade steel welded construction Premium OPD valve assembly Portable size – ideal for camping, ice fishing, BBQ Easy to hold collar Pre-purged cylinder – ready to be filled Great for portable grills, fire pits, heaters and...

Our unique Rotopax DLX handle design provides extra tightening power for extreme use. Comes with a 1 year warranty. We have multiple ways to mount your FuelpaX to whatever you are using them on- from ATV's and UTV's, 4x4's, Motorcycles, Snowmobiles,...

Attaching a High Lifting Jack directly to the top of your Rhino-Rack Pioneer System has been made simple with the Pioneer High Lifting Jack Holder Bracket. Securely attach your High Lifting Jack in place with our strong, durable and corrosion resistant...

The Rotopax DLX (Deluxe) Pack Mounts Unique designs adds strength and provides extra tightening power due to its dual handles. Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top...

Replace your Xplor bed racks (included) silver hardware with our black hardware upgrade.  Includes all necessary carriage bolts (3/8" x 1") to convenientrly replace the ones that are already installed/provided with your XPLOR Bed rack. NOTE:Carriage...

Introducing the aluminum Full Height XPLOR Bed Rack Rear Molle Hatch Panel. Designed specifically for the Rebel Off Road Full Height XLOR Bed rack, the rear molle hatch is the ultimate protective solution for your XPLOR FullHeight Rack on your Jeep...

The Headache Rack mounts to the XPLOR Rack (Full height and Half height) crossbars directly behind your rear window and adds additional safety and protection from any of the items you've placed loose in the back of your Gladiator (remember, the factory...

The ultimate protective solution for your XPLOR Half Height Rack on your Gladiator. Secure your off-roading gear with confidence and style. Crafted from robust 16-gauge lightweight aluminum, this versatile half height panel enclosure seamlessly...

Introducing an exclusive Rebel Off Road bundle designed specifically for your Jeep Gladiator JT, using curated parts consisting of a Dometic 53L Fridge, matching fridge slide and our Rebel Fridge Slide Mount. All custom designed for the true outdoor...

Wander without worry. The Dometic CFX3 SLD55 is designed to allow easy access to your CFX3 powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity and rugged latching system make the CFX3 fridge...

The highly requested rear hatch for the XPLOR Full Height Bed Rack is here - XPLOR Rear Hatch Plate Enclosure. Constructed from lightweight aluminum, this full-height plate enclosure fits perfectly into the rear of your Gladiators XPLOR Rack creating an...

The BKT-2286 Power Tank Propane Tank Bracket is a heavy duty stainless steel bracket designed to fit the 11 Lb, 2.6 Gallon LP Bottle. This bracket fits 9 Inch Diameter tanks and designed to install on any flat surface. The 11Lb propane tank is ideal for...

The Rhino-Rack 572 Fishing Rod Holder provides a convenient way to transport your fishing rods on your next fishing trip. This fishing rod holder can also be used in the winter to carry two pairs of skis or a small snowboard to the mountains. Snap it...

The highly requested rear hatch for the XPLOR Half Height Bed Rack is here - XPLOR Rear Hatch Plate Enclosure. Constructed from lightweight aluminum, this half height plate enclosure fits perfectly into the rear of your Gladiators XPLOR Rack creating an...