Power Tanks mounting bracket clamps make mounting your Power Tank easy and clean. The compact design allows it to fit between the roll bar and the inside of the rig. The allen socket button head bolts are nothing less than stainless steel. The grip groove inside the clamp keeps shims from shifting during heavy offroad racing.
Leave the fabric cover on your YJ, TJ, LJ, or JK and still be able to clamp your bracket to your roll bar with our Large Roll Bar Clamps. They also fit 2 3/8" dia. (Bronco) and 2 1/4" dia. tubing (Wrangler without cover). 2004 and later Wrangler owners, note that there may be an extra layer of rigid foam beneath the zippered padding and a small amount of it will have to be removed to allow the clamp bolts to get started.
If you plan on mounting to the passenger side roll bar in a JK, be aware that there is a wire running from near the tail light to the dome light. You will have to slot the wire in the groove provided in the clamp, otherwise you may damage the wire.
When mounting a 10 lb. or 15 lb. Power Tank, it is recommended to use two or three clamps.
When mounting a 20 lb. Power Tank, it is recommended to use three clamps.
- Small fits tubing diameters of 1.5 - 2.0 in.
- Large fits tubing diameters of 2.25 - 2.5 in. (most Jeeps)
- Aluminum Billet