FACTOR 55

Factor 55 Load Distribution Plate

SKU:
00470-06
Availability:
Non Stocking Item- Lead Times Vary Based On Availability
Weight:
2.00 LBS
  • Factor 55 Load Distribution Plate
  • Factor 55 Load Distribution Plate
  • Factor 55 Load Distribution Plate
  • Factor 55 Load Distribution Plate
$100.00

Description

The Factor 55 Load Distribution Plate (LDP) is a unique rigging device designed for distribution of multiple loads and directions while recovering an item/vehicle. 

The LDP provides a safe, central collection point for winching, rigging and recovering. Using a load distribution plate also prevents collecting multiple loads on to a single shackle, which can overload a standard shackle, leading to failure.

The self-aligning shackle pin holes fit common 3/4 inch pin shackles, and keep your shackle centered no mater what the angle/load is. The Factor 55 LDP's pear shaped holes permit 3/4 inch and 7/8 inch shackle bodies to pass through with ease.

Laser engraved angle scale has been added for sling multiplier estimates. Symmetric shape allows for common bridle tow configurations. Large smooth corner radius for soft shackle applications. Precision machined from 6000 series Military Grade Aluminum. Engineered, Tested, and Made In The USA. Military Specification Hard Anodized finish (Mil-A-8625 F Type III Gray). Working Load Limit 20,000 pounds. Minimum Breaking Strength 42,000 pounds.

Features:

  • Load Distribution Plate-Gray
  • Rigging plate designed for distribution of multiple loads and directions
  • Safe collection point for multiple winching applications
  • Prevents collecting multiple loads on a single shackle
  • Self-aligning shackle pin holes fit common 3/4 shackles
  • Pear shaped holes permit 3/4 and 7/8 shackle bodies to pass through
  • Laser engraved angle scale for sling multiplier estimates
  • Symmetric shape allows for common bridle tow configurations
  • Large smooth corner radii for soft shackle applications
  • Precision machined from 6000 series Military Grade Aluminum
  • Engineered, Tested, and Made In The USA
  • Military Specification Hard Anodized finish (Mil-A-8625 F Type III Gray)
  • Working Load Limit 20,000 pounds
  • Minimum Breaking Strength 42,000 pounds
  • Weight-26 ounces
View AllClose

Related Products

Related Products

Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Red

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Gray

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Silver

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Black

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...
The winch lock bolt is a custom 3/8-16 precision security bolt made from 1045 carbon alloy steel heat treated to Grade 5 yield strength. The key patterned head bolt is proprietary and the matching key is not available at your local retail hardware store. The winch lock bolt cannot be removed with ordinary screw drivers, pliers, or commonly sold security bits. Simply substitute one of your winch mounting bolts with the “Winch Lock” bolt and your winch is protected – simple!Fits all winches with standard 3/8 -16 mounting hardware- shank length 1.25 inchesFeatures:Made from heat treated 1045 carbon steel, zinc chromate corrosion protectionProprietary security key patternHidden spring lock washer pocket ensures gapless installation60 degree head taper to prevent removal with pliersSimple fail proof design : no clumsy traditional key mechanisms to corrode/failSpecial coded security key allows for both end, and side accessFACT - Every 27 seconds a vehicle is being vandalized or stolen in the USA. Don’t get ripped off!- protect your investment! Why spend hundreds of dollars on your winch or expensive bumper and not lock it down? Second only to wheels and tires, the winch is the most common stolen item from your 4X4. WHY GAPLESS? All Factor 55 precision security fasteners possess a unique gapless locking feature that prevents the fastener or nut from loosening due to vibration. The gapless technology is an exclusive machined groove under the head of the fastener that hides a split lock washer when clamped down. The fastener head sits right down on the clamping surface without revealing a gap or edge for the would be thief to clamp with pliers or other tools. Simple and effective.Remove any one of your standard winch mounting bolts from bumper/winch, install locking nut.
Add to Cart
Quick view

FACTOR 55 Winch Lock

FACTOR 55

$29.00
The winch lock bolt is a custom 3/8-16 precision security bolt made from 1045 carbon alloy steel heat treated to Grade 5 yield strength. The key patterned head bolt is proprietary and the matching...
Factor 55 Strap Wraps
Add to Cart
Quick view

Factor 55 Strap Wraps

FACTOR 55

$19.00
The perfect way to store your miscellaneous straps, ropes, and gear. The Factor 55 Strap Wraps feature hook and loop closure and a heavy duty powder coated steel ring to secure gear in various sizes...
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.MADE IN USAU.S. Utility Patent No. 9,388,025Foreign Patents Pending
Add to Cart
Quick view

FACTOR 55 FlatLink - Blue

FACTOR 55

$146.00
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry's first folding shackle mount for...