Description
Experience a world of unmatched performance and durability with Clayton Off Road's Short Arm Control Arms for your Jeep Gladiator JT. Whether your JT is stock or lifted, Claytons control arms are engineered to enhance your vehicle's capabilities from 0" to over 5" of lift. These arms are not just about strength; they're about flexibility and precision.
Designed for those who demand the best in off-road performance, they ensure optimal axle positioning, caster, and pinion angles, enhancing your driving experience. With a lifetime warranty, these control arms promise endurance and reliability, setting a new standard in the off-roading community. Built to outlast and outperform, they are the ultimate upgrade for your Jeep Gladiator JT, offering unparalleled control and stability in any terrain. Trust Clayton Off Road to take your Gladiator's performance to the next level.
The Clayton Off Road Jeep Gladiator Overland Plus control arms offer a smooth on road ride and amazing off road flex by using Giiro joints. The Giiro Joint is a dual durometer, self centering joint, that is maintenance free.
The outside part of the bushing is softer, to isolate road noise and vibrations and allow the bushing to articulate. It has 13.3 degree of movement in each direction, or 26.6 degrees combined per bushing. Since we use these bushing at both ends, you have over 50 degrees of unrestricted movement. The inside area of the bushing is harder and teflon infused to act as a bearing surface for the center pin which is free to twist as the suspension moves up and down. Combined with our 1/4 wall tubing lower control arm tubing, premium tube inserts, 5/16s thick welded lower control arm housing and forged adjusters, you have the Ultimate control arms available.
They are designed to be used from 0" to 5"+ of lift. So, whether your JT is stock and you're looking for stronger better flexing control arms. Or have a lifted JT and need to properly adjust your axle position, caster angle or pinion angle, these control arms are built to outperform and outlast our competition.
And with our LIFETIME warranty, these are the best and last set of control arms you will need.
Clayton Gladiator JT Control Arm Specs:
COR-1709100 - JL/JT FRONT LOWERS
Center to Center STOCK = 24.000"
Center to Center MIN = 23.9375"
Center to Center MAX = 24.880"
COR-1709101 - JL/JT FRONT UPPERS
Center to Center STOCK = 20-3/16"
Center to Center MIN = 19-3/4"
Center to Center MAX = 21-1/8"
COR-1710102 - JT REAR LOWERS
Center to Center STOCK = 23.750"
Center to Center MIN = 23.4375"
Center to Center MAX = 25.125"
COR-1710103 - JT REAR UPPERS
Center to Center STOCK = 16.375"
Center to Center MIN = 16.0625"
Center to Center MAX = 17.4375"
If you want the best control arms on the market with ZERO maintenance, look no further.
All Clayton Off Road Inc. control arms carry a lifetime, no questions asked warranty against bending or breaking.
