null ​​​​​​​​​​

Carli Suspension 2" Back Country System 2.0, 2019+ Ram 2500 Power Wagon

(No reviews yet) Write a Review
SKU:
CS-DBC20-19-PW
Weight:
241.00 LBS
$4,345.00
Frequently bought together:

Description

The Carli Suspension Backcountry System is a custom tuned 2" suspension system for the 2019+ Ram 2500 Power Wagon, including all the necessary components needed to complete your installation.

Signature Shock Tuning is achieved by way of a 2.0″ Remote Reservoir Fox Shock, providing users with comfortable entry level off-road capability, paired with a controlled, vastly improved on-road ride.

Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
2.0″ 1″ 9.6″ 11″ 2.0″ 37″

COMPONENTS INCLUDED:

  • Rear Extended Sway Bar End Links
  • Dodge Front Bump Drop, 1"
  • 3" Lift, Linear Rate Coil Springs
  • Dodge Multi Rate Coil, 2014+, REAR
  • Dodge Track Bar, 2014+
  • Dodge Radius Arm Drops, 2014+
  • Transmission Crossmember, Extended Hardware Kit
  • Dodge Rear Bump Drop, Aluminum 1"
  • Dodge Track Bar Drop, 2014, Rear
  • Carli Tuned Fox 2.0" Remote Reservoir Shocks, Front and Rear
  • Skid Plate Spacer
  • Harmonic Damper Relocation Bracket

The Details: Your truck will sit 2” higher in the front (cab configuration dependent) with a touch more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear Carli Coil Springs will lift 1” to level the truck while upping the rear suspension capacity to a respectable 2,000lbs.

Wheels and Tires: This system will fit up to a 37” tire when utilizing wheels that are no more than 9” wide with 5.75-6” of backspacing. A 12.5” wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5” will require more trimming and slightly more offset to fit properly. 35” tires will fit with VERY minimal, if any trimming. We recommend running a 17”/18” diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35”-37” E-rated tire running 45psi front, 40psi rear when unloaded.

The Backcountry 2.0 system is designed for people seeking the best ride on and off-road on a budget; perfect for those that want to have a little dirt-road fun in their 7,500lb truck without losing the on-road ride quality or usability for which the truck was designed. You’re no longer limited to the low-speed offroad; Gravel roads become uninteresting as you can drive them at speed with one hand on the wheel. Utilizing Fox 2.0” Remote Reservoir Shocks, we’ve developed a shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use; think of them as a more capable Commuter. The Fox 2.0s boast extruded aluminum construction with a clear anodizing for corrosion resistance, are fully rebuildable and are built with hour-glass bushings in the rod-ends. Fox builds these shocks with their legendary red shock oil that flows well down to -55° F.

The Factory Sway Bar Disconnect with which the Power Wagons are equipped works great for those wanting the two ends of the spectrum, rigid or flexy. For those wanting to land in the middle of the spectrum between these two end points, Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension when compared to the locked, factory sway bar. The Carli Sway Bar allows nearly bind-free articulation in low-speed applications; when things heat up, it allows the Carli Shocks and springs to breath while engaging progressively to provide control in high-speed cornering situations.

The additional front lift and off-road oriented application call for a better track bar to handle the new-found increased off-road abilities. This system includes an Adjustable Track Bar to recenter the axle and provide a stronger link with less deflection for the lifted application. Also included are Carli’s Radius Arm Drop Brackets to drop the pivot point of the dual pivot Power Wagon arms, alleviate diagonal spring pressures (ensure no bow in the coil springs) and allow full adjustment of the factory caster bolt.

Everything is included to support flawless operation of all components. Extended rear Sway Bar End Links, Front and Rear Bump stop drops to ensure the shocks are cycling in their designed travel range as well as a rear track bar drop bracket minimizing the rear end “wag” associated with opposing track bar suspension designs are all included to round off this suspension system.

OPTIONAL UPGRADES:

Torsion Sway Bar:

- Easily the best "bang for the buck" upgrade for ride quality
- Allows front suspension to move freely without giving up control
- Requires removal of electronic sway bar on Power Wagons
- Fitment: 2014+ 2500 4x4
- Fitment: 2013+ 3500 4x4
- Compatible with 2.5"-4" Front Lift
- NOT compatible with Stock wheels, Max 5.75" backspace

$795.00
Carli Torsion Sway Bar, Ram Power wagon

Low Mount Steering Stablizer:

- Direct bolt-in replacement
- Corrects left tire pull, adjustable
- Inside the Carli Stainless Stabilizer
- Fitment: 2014+ Ram 2500, 4×4
- Fitment: 2013+ Ram 3500, 4×4

$320.00

Carli Suspension Low Mount Steering Stabilizer, Ram Power Wagon

High Mount Steering Stabilizer:

- Simple, Bolt-in Installation
- Corrects right tire pull, adjustable
- Combines with Low-Mount for opposing stabilization
- Inside the Carli Stainless Stabilizer
- Fitment: 2019+ Ram 2500/3500, 4×4, Including Power Wagon
- Fitment: 2014-18 Ram 2500/3500, 4×4 with 19+ Drag Link

$450.00

Carli Suspension high Mount Steering Stabilizer, ram Power Wagon

Front Differential Guard:

- Protection for your Ring-Gear
- Bolts On In Minutes
- 1/4" Wall Cold-Rolled Steel Construction
- Grade 8 Hardware
- Fitment: 2014+ Ram 2500, 4x4
- Fitment: 2013+ Ram 3500, 4x4
- Power Wagons may require modification to the Diff Guard or Lower Diff Housing.

$210.00

Carli Suspension Front Differential Guard, Ram Power Wagon

Lifetime Warranty Ball joints:

- Set of Upper and Lower Ball Joints
- LIFETIME Advanced-Replacement Warranty
- Copper Plated, Carburized and Dry-Lubed
- Includes a tube of Redline CV2 Grease
- Fitment: 2013+ Ram 3500 4x4
- Fitment: 2014+ Ram 2500 4x4

$895.00

 Carli Suspension Lifetime Warranty Ball joints, Ram Power Wagon
View AllClose

Warranty Information

Carli Suspension provides a limited lifetime product warranty against defects in workmanship and materials from date of purchase to the original purchaser for all products produced by Carli Suspension. Parts not manufactured by, but made to Carli Suspension’s specifications by third party manufacturers will carry a warranty through their respective manufacturer. Carli Suspension’s Limited Lifetime Warranty excludes the following parts which are subject to wear: Bushings, Heim Joints, Uniballs, Limit Straps. Carli Suspension cannot warrant a product’s cosmetic finish due to the varying extreme elements that may be encountered. Any alterations, substitutions, aftermarket parts (directly affecting the part in question), modifications, or improper installation of the product will void this warranty. Carli Suspension’s obligation under this warranty is limited to the repair or replacement of the defective product only. All costs of removal, installation or reinstallation, freight charges, incidental or consequential damage are expressly excluded from this warranty.
View AllClose

0 Reviews

View AllClose