Looking for a truly modular, make it your own bed rack system for your Jeep Gladiator JT? Look no further. We've created the XPLOR Bed Rack with customization front and center. With the ability to mount our carrier plates on the outside, inside and top of the rack, you can create the perfect setup for your next adventure.
The Ultimate Modular JT Bed Rack System
We went with 1/2" bolts for mounting to your existing factory frame rails and 3/8" carriage bolts throughout out the frame for added strength and reliability. Our powder coated racks are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.
Our rack allows you also to run either a Halo Rack on top or the Rhino Rack Pioneer platform for additional mounting/storage options. The XPLOR rack includes plenty of locations to mount lights, however, if you decide you need to make your own, feel free to drill into the frame and create your custom light setup.
You'll receive front, middle and rear uprights (Left to right) including their corresponding crossbars (Front to back). Four carrier plates for exterior side mounting. Six top channel braces, perfect for mounting our rooftop tent rail system or other accessories. You'll also receive a vanity plate for mounting behind the cut-out Rebel Off Road Logo, which you can powder coat or paint any color to match your Gladiator.
- Includes 3/8" black carriage bolts for assembling the rack
- Includes 1/2" mounting bolts for your bed rail
- Ability to customize the rack to your liking
- Offered in RAW (Unpainted bare steel) or textured black powder coat
- 900 Lbs max capacity (Static, while parked)
- 750 Lbs max capacity (Dynamic, while driving)
**FREE T SHIRT INCLUDED WITH THE PURCHASE OF AN XPLOR BED RACK**
Select size in drop down menu
|FULL HEIGHT||HALF HEIGHT|
BASIC SET UP INCLUDES:
BASIC SET UP INCLUDES:
ROOFTOP TENT MOUNTING
To elevate your RTT, you can use our Stand Off Brackets (SOB's) which allow you to mount the tent without the supplied brackets, and will raise the tent 2" above the cab if necessary. 4 brackets (2 per side) are acceptable for light off road use, whereas we recommend 6 brackets (3 per side) for vehicles that will see heavy offroad use.
To keep your RTT low and retain your tents factory mounting hardware, you can use our mounting extrusion rails. This enables you to use your tents standard hardware. This works perfectly with all RTT's, including the iKamper.
Your Gladiator Must Have Bed Rails To Mount Our XPLOR Rack To Your Bed:
Did your Gladiator not come with factory rails? No problem, you can purchase our HD Bed Rails as an accessory and at a much more affordable price.
Made In The USA!
CHECK OUT OUR FULL LINE OF CURATED 3RD PARTY ACCESSORIES HERE
Jeep Gladiator Bed Rack - XPLOR Rack by Rebel Off Road
XPLOR RACK BY REBEL OFF ROAD The Ultimate Modular JT Bed Rac...
The Great Divide - The Journey Into Colorado - Episode One
The long anticipated first episode of our Continental Divide T...
Gladiator Loadout Vol. 1 - The Great Divide - Rebel Off Road
Bond gives a detailed walk around of our Full Height XPLOR Rac...
Gladiator Loadout Vol. 2 - Must Be Nice - The Great Divide - Rebel Off Road
Bond gives a detailed walk around of our Half Height XPLOR Rac...
XPLOR Rack Timeplapse video
Check out this cool time lapse video we did of Rich doing an i...
Working on new mounts for the XPLOR Rack System.
We’ve been working on new ways to mount Roof Top Tents to our ...
Learn more about the utility of our XPLOR Rack
Learn more about the utility of our XPLOR Rack as Amador shows...
Great build quality, great customer service! A couple pieces were missing from my original shipment, but Rebel rectified it quickly. I run the half height rack with underside tire mount and Lite Rider tonneau cover, however these things do not all jive perfectly. As the specs list, there are only 12" from the bottom of the rack to the top of the bed rails. The combination of only a half height rack, and 12.5" wide tire hung from below means the tonneau cover sags slightly, and the tonneau cover crossbars can't be installed. Not the end of the world, but wanted to leave this note for others to find!
I am happy with the product. Rack feels sturdy. Note: If you have a roll up bed cover you need to leave some room on the sides of the bed to finish rolling it up. So be weary before ordering to many side panels. I rated 4 not 5 because 1 part came bent, I had to bend it into place but its still not straight. Also, i notice a small scratch on the part and after about 1 week there's rust.
Love this rack! Easy to build, tons of ways to mount things, love the bed mounts and the table mount and table! Epic products
Love the look, ease of assembly, and the quality. Can’t wait to get everything mounted on it and test it out.
I'm excited about the versatility of the system as I start adding to it to fit my travel needs.