Choose Your Rig - Wrangler JL 2018+ - Armor And Protection - Skid Plates

ALUMINUM SKID PLATES FOR HEAVY DUTY YET LIGHTWEIGHT PROTECTION.At a total of 86 lbs, the total net weight is only 10 lbs more than factory skids but much heavier duty and more complete coverage.Artec Industries' NEW JL Bellypan is designed to give your 2018+ Jeep JLU Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 1/4" thick 6061 Aluminum and 3/16" zinc plated Steel, and CNC cut and formed, the Artec JL Bellypan Kit offers both a strong and lightweight solution for your new Jeep JL.Adds only 10 lbs to net weight of vehicle yet covers far more and is heavier duty than factory skids86 lbs total weight compared to the Steel version at 153 lbs...a 44% weight savingsIncreases ground clearance of 3/4" from factory skids and even more compared to other aftermarket skid plates1/4" 6061 Aluminum for skid plates, 3/16" zinc plated steel bracketsDesigned from factory CAD files for great and ultra precise fit.CNC laser cut and CNC formed using custom rolled dies for high strength, unique look, and perfect contour fitment to OEM components.All bolts under skid plate are countersunk for absolutely smooth bottomAll nuts are pressed into steel brackets for easy, one tool removalBolts directly to OEM T-case crossmember and frame using heavy duty flat head bolts that match OEM threadNo need for an aftermarket T-case crossmember for completely flat surfaceModular design lets you take off only one section for vehicle servicingProtects Oil Pan, Transmission Pan, Gas Tank, Front Exhaust and Transfer CaseOEM gas tank skid is replaced for reduced weight and 3/4" higher clearance*Artec Gas tank skid can be removed without dropping entire tank thanks to new additional cross-member and tank strap.Clearance near rear drive yoke shaft to prevent rubbing*OEM gas tank skid removal required. For easiest install, remove skid when tank is near empty. See instructions for simple ideas on removing OEM gas tank skid.NOTE: This product requires general mechanics skills and should only be installed by someone capable of using basic tools. Artec Industries is not responsible for incorrect installation. By purchasing, the customer agrees that they are fully responsible for correct installation.INSTALLATION INSTRUCTIONS

ARTEC INDUSTRIES

ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L ALUMINUM

ALUMINUM SKID PLATES FOR HEAVY DUTY YET LIGHTWEIGHT PROTECTION.At a total of 86 lbs, the total net weight is only 10 lbs more than factory skids but much heavier duty and more complete coverage.Artec Industries' NEW JL Bellypan is designed to give your...

$2,199.99

Add to Cart Buy Now Compare

ARTEC INDUSTRIES

ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L STEEL

HEAVY DUTY STEEL SKID PLATES FOR ULTIMATE AND COMPLETE PROTECTION.Artec Industries' NEW JL Bellypan is designed to give your 2018+ Jeep JLU Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this...

$1,299.99

Add to Cart Buy Now Compare

This Add-on skid protects the electronic sway bar disconnect under the front bumper as well as the factory frame extensions.Made in the USA from 3/16" CNC laser cut and formed steelShips in bare steel to allow customizable color coordination*Fully Welded to allow immediate bolt-on capabilityIncludes hardware***Shown Painted for illustration. Items will arrive in bare Steel and may have minor imperfections which are typically covered with a textured coating. For smooth finishes extra preparation should be considered to achieve desired look***

ARTEC INDUSTRIES

ARTEC INDUSTRIES -JL NIGHTHAWK: FRONT SWAYBAR SKID

This Add-on skid protects the electronic sway bar disconnect under the front bumper as well as the factory frame extensions.Made in the USA from 3/16" CNC laser cut and formed steelShips in bare steel to allow customizable color coordination*Fully Welded...

$149.99

Add to Cart Buy Now Compare

METALCLOAK

Metalcloak - Undercloak Integrated Armor System For JL Wrangler 4DR/3.6 Motor - 6360

It's a Fact... the New Jeep JL Wranglers need underside protection - the MetalCloakUnderCloak Integrated Boat-Sided Armor & Skid Plate System is just what it needs. Not just a couple of cut pieces of steel bolted to the bottom of a Jeep, the GOLD zinc...

$999.00

Add to Cart Buy Now Compare

Poison Spyder

POISON SPYDER - JL TRAMP STAMP

The Poison Spyder JL Tramp Stamp cleans up the appearance of the rear of the Jeep JL Wrangler, when running without a tailgate-mounted spare tire. It conceals the cabin air vents and spare tire mount bolt holes while providing a convenient place to...

$55.00

Add to Cart Buy Now Compare

Rock Hard 4x4

ROCK HARD 4X4 - ALUMINUM COMPLETE BELLYPAN SKID PLATE SYSTEM WITH DUAL CROSSMEMBERS FOR JEEP WRANGLER JL 4DR 3.6L 2018 - CURRENT RH-90549

Fits 2018 - Current Jeep Wrangler JL models.JL Skid PlatesThe Jeep Wrangler JL brings many upgrades over the best-selling 2007 - 2018 JK, but also has it's own unique undercarriage short-comings. It lacks any skid plates! A selling feature of the JL is...

$1,699.95

Add to Cart Buy Now Compare

Rock Hard 4x4

Rock Hard 4x4 - Complete Bellypan Skid Plate System With Dual Cross Members For Jeep Wrangler JL 4DR 3.6l 2018 - Current RH-90509

Fits 2018 - Current Jeep Wrangler JL models.JL Skid PlatesThe Jeep Wrangler JL brings many upgrades over the best-selling 2007 - 2018 JK, but also has it's own unique undercarriage short-comings. It lacks any skid plates! A selling feature of the JL is...

$1,399.95

Add to Cart Buy Now Compare

Warn ZEON 10-S Platinum Winch - 92815

Warn ZEON 12 Platinum Winch - 92820

Warn ZEON 12-S Platinum Winch - 95960

Warn Epic Winch Hook - 18,000 lb - 92091

Warn Epic D-Ring Shackle - 18,000 lb - 92093

Skid Plates

Sort By

ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L ALUMINUM

ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L STEEL

ARTEC INDUSTRIES -JL NIGHTHAWK: FRONT SWAYBAR SKID

Metalcloak - Undercloak Integrated Armor System For JL Wrangler 4DR/3.6 Motor - 6360

POISON SPYDER - JL TRAMP STAMP

ROCK HARD 4X4 - ALUMINUM COMPLETE BELLYPAN SKID PLATE SYSTEM WITH DUAL CROSSMEMBERS FOR JEEP WRANGLER JL 4DR 3.6L 2018 - CURRENT RH-90549

Rock Hard 4x4 - Complete Bellypan Skid Plate System With Dual Cross Members For Jeep Wrangler JL 4DR 3.6l 2018 - Current RH-90509