​​​​​​​​​​
Rock-Slide Engineering

Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D

(No reviews yet) Write a Review
SKU:
BD-SS-300-JK2
Availability:
Non Stocking Item- Lead Times Vary Based On Availability
Weight:
80.00 LBS
On Sale
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
  • Rock-Slide Engineering Step Sliders, 07-17 Jeep Wrangler JK 2D- BD-SS-200-JK2
Now: $1,979.10
Was: $2,199.99

Description

The Rock-Slide Engineering Step Sliders are the perfect addition to your Jeep Wrangler JK. These steps are made of 10-gauge steel and are powder coated in a textured black finish. The steps automatically deploy when the door is opened, and they retract when the door is closed. They are rated for moderate off-road conditions and have a skid plate for more aggressive trails.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection. For more information and related products, please view below!

Features:
Fully Functional Step and Rock Slider

Smart Motor
Automated Deploy and Retraction of the Sep
Use of Original Equipment from Manufacturing
Powder Coat: Textured Black
3/16” Steel
Stainless Steel and Aluminum Internals
Made in the USA.

Fits:
JK Wrangler Unlimited (2-door).

Includes:
Both Driver and Passenger side Step Slider
Complete Stand-alone wire harness
Magnetic Door Sensors
Additional Mounting Hardware
Limited Warranty (see documents for warranty information)

Notes:
Shipped in 2 boxes, Drivers Side and Passenger Side.
Skid plates optional #AX-SP-300-JK2
Rocker Guards optional #AX-SS-RG-JK2
LED light kit optional #SL-LK-LED
Door Delete Kit optional #SL-DD-100

Install Time:
4 hours

Q & A
Rocker guard sold separately. AX-SS-SP-JK2. Not required for install
One of our biggest questions we often hear is all about our Step Slider and if they are off-road capable.
Yes! That is what we had them built and designed for. They function as perfectly capable sliders when the step is in the closed position. The motors can be submerged and the lights are waterproof. All the connectors are waterproof. They function between -40 degrees and 120 degrees. They may slow down at lower temperature but will still function how they should! They have been tested in Moab in the heat and rocks along with Northern Utah at the manufacture facility where the temperature can hit -30 degrees.?
 
Do I have to cut into the jeep wiring system at all?
Nope! We wanted to keep the jeep and truck computer independent of our system so we send out our own little sensors you will install on your door along with our own small computer and wiring harness. The sensors are actuated with magnets you stick on your door so when they open the steps then deploy, and then when you shut the door they come back up in.
 
I want to go rock crawling but don't want my step to deploy. What do I do?
Easy! We send each and every step slider unit out with a little ¾” rocker on/off switch. Simply switch this to the off position when off-roading and this will turn the system off. If they do deploy our computer will detect if something is below them and stop so the motors don't get damaged. This works going up also. If something gets stuck the system will shut off to prevent injury to you and itself!
 
How hard are they to install and how long is the install time?
The only challenging part is marking the holes and installing the nutserts. Everything else is straightforward and we send out a detailed step by step instruction manual you can follow. We normally recommend the install time to take between 4-5 hours the first time. Some may take longer because they are double and triple checking everything, but installers can do this within 4 hours. Shop rates may differ however.
 
Do your front bumpers or Step Sliders come with lights?
The lights are optional. They do not come with the lights installed, but they are sold separately.They are a simple plug and play option which makes installing them extremely simple.
 
I just placed an order. How long will it take to ship?
Most of our accessories we have in stock and will ship within 1-2 business days. Any large or overweight item may take up to 10-15 business days. We make everything in our fab shop and because of the high demand for our step sliders we will ship as soon as we can! If you want to check and see the status of your order, or to see if we have something in stock, give us a call! We will go and check for you to make sure!
View AllClose

0 Reviews

View AllClose