Description
The Cascadia 4x4 MPPT Charge Controller is a simple yet highly effective unit which has been designed with extreme durability in mind. The waterproof unit is IP67 rated and is highly resistant to heat and vibration. It automatically controls how much electricity reaches the battery and prevents overcharging. The charge controller has been pre-wired with fuses, terminals, and connectors. The controller can be mounted using the pre-installed 3M VHB tape, or with self-tapping screws.
DETAILS:
- Rugged Construction: IP67 waterproof rating, heat and vibration resistant.
- Smart Controller: Automatically controls how much energy reaches the battery and prevents overcharging.
- Accessory output wires allow for 12v charging with built in low voltage cut off to protect the vehicle battery.
- Prewired with fuses, terminals and MC4 connectors.
- 3M VHB mounting tape pre-installed.
- 2 year warranty.
| Maximum Charging Current (Controller -> Battery) | 10A |
| Maximum Charging Current (Controller -> Battery) |
10A |
| System Type (Voltage) 12V Maximum Power Input |
130W |
| Maximum Voltage Input |
45V |
| Battery Compatibility |
AGM/Gel/Pb-Acid |
| Output Current (ACC Wires) |
10A |
| Continuous Low Voltage Disconnect (ACC Wires) |
11.4V |
| Voltage Reconnect (ACC Wires) |
12.0V |
| MPPT Charging Voltage |
<14.5V @25C |
| Float Voltage |
13.7V @25C |
| Boost Voltage |
14.5V @25C |
| Connector Type |
MC4 + Ring Terminal |
| Fuse |
15A |
| Battery Wire Length |
2200mm (86.5") 14 Gauge |
| Equal Voltage |
14.8V @25C |
| Temperature Compensation |
-4.17mV/K per cell (Boost, Equal). -3.33mV/K per cell (Float) |
| Maximum Tracking Efficiency |
99.9% |
| Maximum Charge Conversion |
96% |
| Self Current Draw |
6mA |
| Protection Rating |
IP67 |
