Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Differential Covers are made from thick-walled high strength nodular steel to fend off the most extreme hits in off road driving. Artec diff covers are designed to protect lockers, gears and axles from extreme impact. These covers come with a durable powder coat finish, magnetic drain plug, and high strength steel fasteners for easy bolt-on installation. When strength, performance, and durability matter choose Artec Hardcore performance differential covers.
Manufactured from high strength nodular iron
Thick walled design
Durable powder coat finish
High strength steel fasteners
Magnetic drain plug
Fits Std & Reverse rotation
1 year warranty against Manufacturer defects
Compatible with Differentials
• Dana 50 Front, Straight Axle
• Dana 60 Front, Disconnect Design, '00 & newer
• Dana 60 Front, Disconnect Design, '98 & older
• Dana 60 Front, Disconnect Design, '99 only
• Dana 60 Front, Reverse Rotation
• Dana 60 Front, Standard Rotation - 16 Spline
• Dana 60 Front, Standard Rotation - 30 Spline
• Dana 60 Front, Standard Rotation - 35 Spline
• Dana 60 Rear - 16 Spline
• Dana 60 Rear - 23 Spline
• Dana 60 Rear - 30 Spline
• Dana 60 Rear - 32 Spline
• Dana 60 Rear - 35 Spline
• Dana 70 - 23 Spline
• Dana 70 - 32 Spline
• Dana 70 - 35 Spline
• Dana 70 HD - 35 Spline
• Dana 70 Super 35 Spline
• Dana 70 U - 32 Spline
• Dana 70 U - 35 Spline
Dana 50 Front, Straight Axle Dana 50 Front, Straight Axle
The Currie Enterprises ductile iron differential covers are a clean, trim shape that provides ample clearance for front or rear applications where steering or gas tank clearance is a concern due to...
This Currie Enterprises ductile iron differential covers for Dana 60 & 70's are a clean, trim shape that provides ample clearance for front or rear applications where steering or gas tank...
Artec Nodular Iron Cover for GM14T with 3/8" Cover Bolts for Non-Ribbed Differential Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore...
Artec Nodular Iron Cover for GM14T with 8mm Cover Bolts for Ribbed Differential Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore...
The Blackout Survivalist takes the super tough, blackened Survivalist head to a new level. The matte black finished American hickory handle engraved with our logo pairs perfectly with the blackened,...
Introducing our Rebel Off Road branded burnt orange tire thumper from Hardcore Hammers. The Burnt Orange style has been in huge demand! Because of that, we've released a Burnt Orange version of our...
Geared to be used near the campsite as well as beyond, this refined, 17" long axe is sure to get you out of jam early! The Gerber 17.5" hatchet is a more evolved hatchet, for woodsmen who need...
Everything you need to make your factory JL or JT front axle housing the strongest it can be!
APEX Front Axle Truss, Front LCA Skids, Inner C Gussets,
OPTIONAL JL Shield CAD...
JL APEX Front Axle Truss A NEW ERA HAS BEGUN WITH THE ARRIVAL OF THE APEX TRUSS! Artec Industries is proud to announce the next generation of PATENT PENDING axle trusses. This series of...
Discover the ultimate modular bed rack system for your 2020+ Jeep Gladiator JT, designed to offer unparalleled customization options for your off-road adventures.
Introducing the XPLOR Bed Rack,...
JL Front Lower Control Arm Skids These heavy duty skids are designed to take serious abuse and reinforce your JL front axle lower control arm brackets. The 1/4" thick precision cut...
ARTEC JL SHIELD - Front Axle CAD/FAD Skid Artec Industries is excited to announce our new JL SHIELD. The NEW JEEP JL front axle now includes a new Center Axle Disconnect (CAD or Front Axle...
ARTEC JL A-pillar Dual LED Cube Light Mounts Artec Industries is excited to announce thier new JL Light Mount for two cube (aka dually, D-series, or pod) LED Lights. Our mounts are constructed...
ARTEC JL 50 inch LED Light Bar Mounts for Hood Artec Industries is excited to announce our new JL Light Bar Mount for 50 inch Light Bar. Our mounts are constructed from 1/8" thick steel and...
Embrace the ultimate off-roading accessory with the CMM Mounts Jeep Wrangler JL & Gladiator Grab Bar Ball Mount attachment. Expertly crafted from 7075 aerospace-grade Aluminum with an anodized...
The Overland Vehicle Systems Down Range Roof Rack is a low-profile open rack system perfect for complimenting the modern overlander. Designed to be used as a standalone roof rack, or a bed rack top...
ARTEC JL Front Fender Chop Kit Brackets Did you remove the bottom half of your Rubicon Fenders for clearance, only to lose your turn/marker lights and are left with a floppy factory...
ARTEC JL Front Inner Fenders - FREEDOM EDITION Run Larger Tires! Artec Industries is excited to announce our new JL Front Inner Fenders. These aluminum fenders not only protect your engine...
Introducing the XCAP Enclosure for XPLOR Bed Rack Jeep Gladiator 2020+. Now you can get the full, ultimate off-road experience while keeping your belongings securely protected!
Designed to fit on any...
ARTEC JL Front Inner Fenders - Solid Run Larger Tires! Artec Industries is excited to announce our new JL Front Inner Fenders. These aluminum fenders not only protect your engine compartment...
Artec Industries JT Gladiator Bellypan is designed to give your 2021+ Jeep Gladiator ECO DIESEL full protection underneath the vehicle. Made from 1/4" thick 6061 Aluminum and 3/16" zinc plated steel,...
It’s not just about boiling, it’s about cooking. The Jetboil MiniMo cooking system delivers simmer control, metal handles, and a low spoon angle for easy eating! Starting with the...
UD60 Front APEX Truss MAKE YOUR FRONT AXLE MORE RIGID AND PREVENT TUBE SPIN A NEW ERA HAS BEGUN WITH THE ARRIVAL OF THE APEX TRUSS! Artec Industries is proud to announce the next generation of PATENT...
ARTEC JL Front Inner Fenders - Vented Run Larger Tires! Artec Industries is excited to announce our new JL Front Inner Fenders. These aluminum fenders not only protect your engine compartment...
JL + JT Bottle Opener Never be without a way to open your bottled frosty beverage. The JL + JT Bottle Opener mounts directly under the roll bar next to the front seats and conveniently tucks...
Did your Gladiator not come from the factory with a set of three bed rails? We have ya covered with our HD Bed Rails!
Not only do they cost less than ordering from Jeep, but they are much more...
The Evasion roof top tent opens via a full pop-up mechanism to maximize living area inside the tent.
To maximize airflow there are entrances on both sides of the tent, and for extreme...
The James Baroud's Odyssey Rooftop Tent is the perfect companion for your off-road adventures! Designed with unparalleled craftsmanship and functionality, The James Baroud rooftop tent is your ticket...
The KC HiLiTES Gravity Pro 6 50" Light Bar Kit is made specifically for 2021 and newer Jeep Wrangler 392 and Jeep Gladiator Mojave models! Discover exceptional brightness with an impressive output of...
The Artec Industries frame mounted heavy duty premium rock sliders provide maximum protection for your vulnerable rocker panels of your Jeep Wrangler JL 4 door. They come complete with aluminum skids...
A NEW ERA HAS BEGUN WITH THE ARRIVAL OF THE APEX TRUSS! Artec Industries is proud to announce the next generation of PATENT PENDING axle trusses. This series of trusses not only builds on our...
The LITERIDER Roll-Up Cover is ideal for truck owners who place importance on quality but prefer a leaner price.
The LITERIDER Roll-Up Cover is built just like the ACCESS® Original Roll-Up Cover,...
Use this empty storage pack to stuff whatever you need into. Great for carrying your lunch, some dry socks, your cell phone, anything! Capacity Each single pack holds about 2 gallons worth of stuff...
Our Flat Carrier Plates are perfect for mounting a large assortment of accessories outside, inside and on top of our XPLOR Racks.
With T-Slot and Molle mounting options you're free to create any...
Boost your storage space with our Rebel Off Road XCAP Molle Rear Hatch Panel.
This excellent add-on is specifically designed to enhance your Xcap rear hatch, providing extra storage beneath your rear...
Artec Industries is excited to announce our new Front Inner Fenders for 3.0L DIESEL JL Wrangler, 392 Wrangler and 3.0L DIESEL JT Gladiators.
Artec's aluminum fenders not only protect your engine...
The Genesis Basecamp System is the ultimate all-in-one backcountry cooking system, stowing neatly into itself and fitting snugly among your gear.
The convenient nesting stove and cookware provide a...
Trying to figure out how to mount your shovel to a HiLift Jack or flat surface? We've taken all the guess work out of figuring out how to mount your shovel, axe or other tool. Our mounts are made of...
ARTEC JT Rear Inner Fenders Fit 42's on your Gladiator! Artec Industries is excited to announce our new JT Rear Inner Fenders. These aluminum fenders not only protect your rear...
Our unique Rotopax DLX handle design provides extra tightening power for extreme use. Comes with a 1 year warranty.
We have multiple ways to mount your FuelpaX to whatever you are using them on- from...
CALL FOR PRICING- NOT AVAILABLE ONLINE Forged from stainless steel (not fiberglass)... it could be correctly said it’s built like a truck, not a boat. But this bruiser is more than brawn. From...
A NEW ERA HAS BEGUN WITH THE ARRIVAL OF THE APEX TRUSS! Artec Industries is proud to announce the next generation of PATENT PENDING axle trusses. This series of trusses not only builds on our...
Introducing our new winch fairlead light mounting bracket by Rebel Off Road. Our fairlead light mount provides a convenient location for mounting a light bar or 2 individual lights above your roller...
Rebel Off Road Engineering Universal Aluminum Hawse Fairlead. Our custom built winch fairlead is compatible with most Jeep, Toyota, Ford, and Dodge winch bumpers and all winches using 10" wide...
Introducing the Rebel Off Road Table Mount and Heavy Duty 4-Foot Folding Plastic Table
Discover the practicality and effectiveness of our XPLOR Bed Rack Table Holder, custom-made to accommodate a...
The Rotopax locking handles unique designs adds strength and provides extra tightening power.
Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or...
Get that Jeep Wrangler JL Gladiator 3.0L diesels horsepower and torque back, with the S&B cold air intake. Increased airflow means increased fuel performance for better mileage, more oomph (for...
The Tuff Stuff Overland 270 Degree Vehicle Awning is the perfect way to extend your outdoor living space while on the road.
Tuff Stuff Overlands awning uses a durable 600D Poly Cotton Rip-Stop...
