ARB Twin Air Compressor Kit, 12 Volt - CKMTA12

Non Stocking Item- Lead Times Vary Based On Availability
16.00 LBS
  • ARB Twin Air Compressor Kit 12 Volt - CKMTA12
  • ARB Twin Air Compressor Kit 12 Volt - CKMTA12


If you're an off-road enthusiast, you know the importance of having a reliable air compressor on hand. The ARB Twin Air Compressor Kit 12 Volt - CKMTA12 is a powerful and compact compressor that can quickly inflate any size tire. With an OE-style mounting bracket, it's easy to install and use. And it can accommodate air tools rated up to 85LPM (3CFM) @ 6Bar (90PSI). So whether you're out on the trails or working in the garage, this compressor will get the job done.

The ARB High Output Twin Motor Air Compressor is a compact vehicle mounted compressor has been designed to do everything! Activate your ARB Air Locking Differentials, air up a 35" tire in less than a minute and run air tools. This 100% duty cycle, 6.16 CFM compressor is built to support all of your compressed air needs. Includes a full wiring harness, air locker solenoid terminals, OE-grade compressor isolating switch, mounting hardware and instructions.

Providing optimum power, the ARB twin motor design delivers class-leading air flow for fast inflation purposes. Constructed of lightweight, high-strength engineering grade materials, it incorporates quality components for quiet operation and extended durability. The twin motors incorporate internal thermal protection against extreme temperature damage while a heavy duty in-line maxi fuse for each motor provides professional circuit protection.

  • Designed for inflating Tires and air locker activation when used in conjunction with optional accessories
  • Suitable for many air tools when used in conjunction with a 4L air tank (optional with on-board models)
  • 100% duty cycle
  • Sealed for moisture and dust resistance
  • Hard anodized cylinder bores for reduced friction
  • Teflon impregnated carbon fiber piston seals for maximum trouble free life
  • Anodized mounting bracket dissipates heat
  • Integrated pressure switch, relays and IP55 (waterproof/dustproof) brushless fan cools electronics, motors and cylinder heads
  • Over-pressure safety valve equipped
  • On-board model available in either a 12V or 24V configuration
Constructed primarily of light weight, high strength, engineering grade materials, including military and aerospace standard components.
Pressure switch controlled air manifold system regulates pressure between 9.3Bar 135PSI and 10.3Bar 150PSI suited to air tools and all ARB Air Locker equipped vehicles.
Highest air flow rate of any 12V compressor of its size on the market at 174LPM 6.16CFM.
High efficiency design consumes only 56 Amps at maximum air flow.
Built with sealed components for moisture and dust resistance.
Hard-anodized cylinder bores and PTFE Teflon impregnated carbon
Fiber piston seals for reduced friction and maximum trouble free life.
Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100 percent duty cycle under room temperature conditions.
Anti vibration sound deadening is integrated into the mount.
Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.
High density and high flow washable sintered bronze air filter elements.
Full wiring loom included for simplified installation and easy plug in connectivity to Air Locker control solenoids.
Equipped with dual heavy duty Maxi-Fuses for professional in line circuit protection and true circuit redundancy in case of a fault.
Motors are water sealed, 100 percent ball bearing equipped i.e., no bushings used, and feature a unique linear brush pre load system for extra long life, low heat and quiet operation throughout the life of the unit.
Motors are internally thermal protected against extreme temperature damage.
Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.
Over-pressure safety valve equipped.
Sealed illuminated automotive grade dash switch included.
Fully serviceable and all replacement parts available.
EMF suppressed for use in proximity to sensitive electronic equipment.
CE and C Tick compliant.
Engineered, built, and individually dyno-tested in Australia from local and imported components.



  • Fully assembled and tested air compressor
  • Complete wiring loom with Air Locker solenoid plug in terminals.
  • Automotive OEM quality compressor isolating switch.
  • 2 x relocatable splash resistant air filters with washable high flow sintered bronze filter cartridges.
  • Mounting bolts and washers.
  • Comprehensive photo illustrated installation guide.

**NOTE: Must purchase hose & tire inflator gauge separately.

View AllClose

Videos Hide Videos Show Videos