Name: Hanson JK Basic Rear Bumper
Brand: Hanson
SKU: JKR4002-P
Price: 899 USD
Availability: InStock

Hanson JK Basic Rear Bumper

SKU:

JKR4002-P

Availability:

Non Stocking Item- Lead Times Vary Based On Availability

Weight:

150.00 LBS

Description

Description

The handcrafted construction of this sturdy bumper consists of 3/16 cold rolled steel and frenched-in 2 receiver hitch. The combination of sturdy construction and multiple angles adds strength and optimizes departure angles. This bumper wraps around the rear body with a thinner profile than stock bumpers. Integrated hitch does not interfere with ground clearance or departure angles. Powder coated in black semi-gloss finish. Hanson's rear bumper works w/stock size tires, if you are going to run larger than stock we suggest our tire carrier.

View AllClose

Hanson JK Medium Basic Front Bumper

Hanson

$669.00

The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use and allows for maximum wheel...

The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. Its handcrafted from 3/16 cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2 dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1 wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8 pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat. NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper. — Choose Options

Quick view

Hanson JK Stubby Basic Front Bumper

Hanson

$869.00

The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. Its handcrafted from 3/16...

CARGO BASKET COMPATIBLE! Bumper is made of 3/16" steel, that is laser cut and formed. It has a drop down deck in it to allow the rear tire to be mounted lower. It also has a built in 2" class 2 receiver for hauling and towing. The tire carrier is all new and similar to our TJ square frame unit. It features a 3/16" upper latch plate that mounts to the tailgate and will accept all Hanson cargo packages! The tire carrier, carries a 37" tire with no problems or rattles. It will carry a 48" HiLift as shown in the picture. Tire carrier opens very easily. It uses a bear claw latch very similar to a car door latch, gentle pull release lever the unit unlocks and is ready to open. — Choose Options

Quick view

Hanson JK Rear Spindle Bumper/Square Frame Tire Carrier

Hanson

$1,498.00

CARGO BASKET COMPATIBLE! Bumper is made of 3/16" steel, that is laser cut and formed. It has a drop down deck in it to allow the rear tire to be mounted lower. It also has a built in 2" class 2...

The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use. Provides additional protection for the winch. The robust design allows for excellent wheel clearance and good fender protection. Its handcrafted from 3/16 cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2 dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The winch bar is constructed of 1 ¾ diameter x .120 wall tubing and is angled forward and welded for strength. The unique placement and design of the 1 wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8 pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat. NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper. — Choose Options

Quick view

Hanson JK Medium Winchguard Front Bumper

Hanson

$769.00

The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use. Provides additional...

Hanson JK Medium Fenderbar Front Bumper

Hanson

$869.00

The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use. Provides maximum winch and...

Choose Options

Quick view

Hanson JK Fullsize Fenderbar Front Bumper

Hanson

$899.00

This full width bumper (67") gives maximum protection to the JK fenders. The classic Hanson design, along with a thinner outer wing than stock bumpers, gives the vehicle a cleaner front profile so it...

Bumper is made of 3/16 steel, that is laser cut and formed. It has a drop down deck in it to allow the rear tire to be mounted lower. It has a built in 2" receiver. The tire carrier mounts to our spindle that has been in use for years with great success. The tire carrier, carries a 37" tire with no problems or rattles. It will carry a 48" HiLift as shown in the picture. Tire carrier opens very easily. It uses a bear claw latch very similar to a car door latch, gentle pull release lever the unit unlocks and is ready to open. Tire Carrier is constructed of 1.75" ERW tubing. — Choose Options

Quick view

Hanson JK Rear Spindle Bumper/Round Tube Tire Carrier Combo

Hanson

$1,398.00

Bumper is made of 3/16 steel, that is laser cut and formed. It has a drop down deck in it to allow the rear tire to be mounted lower. It has a built in 2" receiver. The tire carrier mounts to our...

Hanson JK Euro Spec Full Width Front Winch Bumper

Hanson

$869.00

The new HANSON Euro Spec Bumper offers sleek, full-width protection for the front of your 2007-2010 JK. It incorporates the HANSON classic drop-center style winch seat and incorporates a wing design...

Constructed of 3/16 cold rolled steel. Formed to protect the sides of the vehicle while providing a strong design for bottom impact. The smooth bottom causes no loss in ground clearance and allows for easy sliding over obstacles. The frenched-in steps provide good footing in all weather conditions. This rugged handcrafted construction is finished in a black semi-gloss powder coat — Choose Options

Quick view

Hanson JK 2-Door Rocksliders

Hanson

$649.00

Constructed of 3/16 cold rolled steel. Formed to protect the sides of the vehicle while providing a strong design for bottom impact. The smooth bottom causes no loss in ground clearance and allows...

Hanson JK Basic Rear Bumper

Description

Related Products

Related Products