Dynatrac

Dynatrac Complete ProRock 60 High-Pinion Semi-Float Rear Axle Assembly - 2007-2018 Jeep JK - Stock Width

SKU:
JP60-2X4010-A
Availability:
Non Stocking Item- Lead Times Vary Based On Availability
Weight:
200.00 LBS
$6,295.00

Description

The Dynatrac ProRock 60 was the first of its kind when it was unveiled in 2002. Today, it's the off-road performance standard to which all other Dana 60 based axles are compared. And now you can have the legendary strength and durability of a Dynatrac ProRock 60 for your 2007-2018 Jeep JK at the lowest price ever offered with this specially configured, completely assembled semi-float rear axle.


Here are the details of this specific axle configuration:

  • Custom Machined Dynatrac ProRock 60 High-Ground Clearance, High-Pinion Semi-Float Rear Axle
  • Heavy-Duty Nodular-Iron ProRock 60 Housing
  • Superior Lightweight Semi-Float Axle Design
  • Standard Lifted JK Housing Geometry and Pinion Angle
  • Stock JK Axle Width (65.5-inch)
  • Heavy-Duty 3.125-inch Diameter, 0.313-inch Wall Draw-Over-Mandrel (DOM) Axle Tubing
  • Dynatrac 3/16-inch JK Rear Coil Spring Suspension Bracket Assembly Kit, Installed
  • Pro Rock 60 Nodular Iron Diff Cover, Installed
  • Dynatrac Heavy-Duty Raised Track Bar (not shown in photo)
  • Dynatrac Pro 60 Dual Sump/High Volume (DSHV) High Pinion Oil Seal Modification, Installed
  • ARB Air Locker, 35 Spline, Installed, with ARB Kit
  • Ring & Pinion, 9.75-inch Diameter, Reverse-cut, 5.38 Ratio, Installed
  • Dynatrac JK Pro Series 60, 35-Spline 1.5-inch Rear Axleshaft Assembly Kit, Installed
  • New Billet Tone Rings Already Installed on the Axleshafts
  • Dynatrac Billet Axleshaft Retainers with Studs - Always Insist on Dynatrac Retainers. Our Studs Will not Strip and Spin Like Other Retainers
  • Axleshafts are Drilled for both 5 on 5 and 5 on 5 1/2 inch Wheel Bolt Pattern; Comes with Studs Installed in 5 on 5 Bolt Pattern
  • Large Tapered Roller Axle Bearings
  • Dynatrac JK ABS/ESP Sensor Mount, Installed
  • Axle is Detailed and Painted Dynatrac Gloss Black
  • 100% Made in the USA
  • Exclusive Dynatrac 1-year No-Fault, Unlimited-Mileage Warranty


The axle comes assembled. All you need to do is bolt it under your Jeep JK, add oil and re-use your stock rear disc brakes. Or you can upgrade to the Dynatrac ProGrip Brake System for a serious improvement in stopping power.
View AllClose