Sway Bars

RockJock's Antirock Sway Bar Kit for the rear of all JT Gladiator vehicles helps free up suspension articulation to increase off-road traction and 4 wheel footing. Additionally, the Antirock attempts to keep the vehicle cabin level to minimize that...

Upgrade your Jeep Wrangler JL or Gladiator JT Rubicon with RPM Steering’s Billet Aluminum Sway Bar End Links, engineered for superior strength, adjustability, and a polished look. Available for lift sizes ranging from 2-3.5" and 4-5.5", these end...

The extended sway bar end links for the Jeep JK/JL Wrangler & Gladiator JT are designed specifically for those with 3"-6" lifts. These links are the perfect solution for those who want to upgrade their sway bar end links and be able to disconnect...

Get the most out of your Jeep Wrangler or Gladiator with the Rock Krawler Suspension sway bar disconnects.  Includes: (2) Front sway bar disconnects (2) Sway bar straps Notes: Not Valid with All High Steer Conversions Functions for a range of 2...

The Rockjock 4X4 heavy rear bar Antirock Sway Bar Kit for the rear of all Jeep JT Gladiator models features a 1 1/8 in. diameter, 28 spline bar! This heavier bar considerably increases the rate of the rear sway bar for those with racks, roof top tents,...

For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate...

The Rock Jock 4x4 246100-103 Antirock Sway Bar Kit for the front of all Jeep JL Wrangler & JT Gladiator models features a 1 in. diameter bar! This heavier bar considerably increases the rate of the front sway bar for those with racks, roof top tents,...

RockJock’s Antirock Sway Bar Kit for the front of all JT Gladiator (and heavy JL) vehicles helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand tools and is designed to directly...

The RockJock® Antirock® Sway Bar Kit for the front of all Jeep® JL and JT models helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand tools and is designed to directly replace...

The RockJock Antirock Sway Bar Kit for the rear of all Jeep® JT Gladiator models helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand tools and is designed to directly replace the...

The Steer Smarts YETI XD Pro-Series Adjustable Track Bar is the strongest, most adjustable track bar on the market for your Jeep Gladiator or Wrangler JL. It's easy to install and works great with stock height or up to 6.5" of lift. The forged steel...

The Steer Smarts YETI XD™ Black Jeep JK/JL/JT Sway Bar End Link Kit was designed to work with Jeep Wrangler's & Gladiators currently running a 2.5"- 3.5" lift. Constructed from high-quality aluminum, these end links utilize a unique truss-style...

Jeep JT Gladiator  Rear Sway Bar Brackets Upgrade your Gladiator's Anti-Sway system using RockJock components   When building our Gladiator, it was obvious that an upgrade was needed on a anti-sway bar. We turned to our marketing partner Currie...

1/2"-20 left hand thread female heim joint with a 1/2" thru hole. As used in our Jeep JT rear Antirock® sway bar kits

1/2"-20 right hand thread female heim joint with a 1/2" thru hole. As used in our Jeep JL front and Jeep JT rear Antirock® sway bar kits.

Complete set of Antirock® sway bar end links includes 8 1/2" link rods that are 1/2" in diameter and feature 1/2"-20 RH thread on one end and 1/2"-20 LH thread on the other end. Also included are the corresponding RH and LH 1/2"-20 female heim joints...

  Complete set of Antirock® sway bar end links includes 10 1/2" link rods that are 1/2" in diameter and feature 1/2"-20 RH thread on one end and 1/2"-20 LH thread on the other end. Also included are the corresponding RH and LH 1/2"-20...

Complete set of Antirock® sway bar end links includes 14" link rods that are 1/2" in diameter and feature 4" of 1/2"-20 RH thread on one end and 2 3/4" of 1/2"-20 LH thread on the other end. Also included are the corresponding RH and LH 1/2"-20...

8 1/2" long Antirock® sway bar end link threaded rod is 1/2" in diameter and features 1/2"-20 RH thread on one end and 1/2"-20 LH thread on the other end. These are the link rods that are included in our JL, JT, JK and TJ front Antirock® kits,...

10 1/2" long Antirock® sway bar end link threaded rod is 1/2" in diameter and features 1/2"-20 RH thread on one end and 1/2"-20 LH thread on the other end. These are the link rods that are included in our JK rear and YJ front Antirock® kits, as...

14" long Antirock® sway bar end link threaded rod is 1/2" in diameter and features 4" of 1/2"-20 RH thread on one end and 2 3/4" of 1/2"-20 LH thread on the other end. These are the link rods that are included in our JL and TJ rear Antirock®...

15 1/2" long Antirock® sway bar end link threaded rod is 5/8" in diameter and features has 1 1/2" of 1/2"-20 RH thread on one end and 1 1/2" of 1/2"-20 LH thread on the other end. These are the link rods that are included in our JT Gladiator rear...

The Rockjock 4x4 arms are 16.2" long overall, making them 14.2" from center of splined hole to center of the farthest 1/2" hole. Rockjocks Arms feature the 2 adjustable link mounting holes for fine tuning of the sway bar in custom applications. Finished...

15" forged chromoly arms for Antirock® sway bar kits as used in our JL, JT, JK front & TJ rear Antirock® sway bar kits are available separately for builders or as an upgrade to existing vehicles. For those looking for maximum strength for...

RockJock’s Antirock Sway Bar Kit for the front of all JL Wrangler and Unlimited vehicles (can be used with JT also, see notes) helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand...