XPLOR Jeep Gladiator Bed Rack - Full Height
- Usually Ships in 2-3 days
- 165.00 LBS
Looking for a truly modular, make it your own bed rack system for your Jeep Gladiator? Look no further. We've created the XPLOR Rack with customization front and center. With the ability to mount our carrier plates on the outside, inside and top of the rack, you can create the perfect setup for your next adventure.
The Ultimate Modular JT Bed Rack System
We went with half inch bolts for mounting to your existing factory frame rails and 3/8" carriage bolts throughout out the frame for added strength and reliability. Our powder coated racks are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.
Our rack allows you also to run either a Halo Rack on top or the Rhino Rack Pioneer platform for additional mounting/storage options. With plenty of locations to mount lights, if you decide you need to make your own, feel free to drill into the cage and create your custom light setup.
- Securely mount any rooftop tent
- Includes 1/2" black carriage bolts
- Ability to customize the rack to your liking
- Offered in raw or textured black powder coat
- 22.5" Height from top of rack to top of the bed rail-
Keeps all gear below the cab
- 40" from top of rack to the bed
- Ability to mount a multitude of accessories
Optional mounts & accessories available here
- 900 Lbs max capacity (Static, while parked)
- 750 Lbs max capacity (Dynamic, while driving)
What's included in the basic setup?
- Front, middle and rear brace bars including their corresponding crossbars
- 4 carrier plates for mounting accessories to the exterior side of your rack
- 6 top channel braces, perfect for mounting rooftop tents or other accessories
- 1 plate for mounting behind the Rebel Off Road Logo cut-out, which you can powder coat/paint any color to match your Gladiator
- Mounting Hardware
- MUST HAVE:
Made In The USA!
||Our Table Mount securely tucks your 4-Foot Granite White Plastic Folding Table up underneath your rack. Metal fasteners keep your table snug and secure. Simply pull the pins and slide your table out for quick access.|
|Our fridge mount bolts to the bed rails, and allows you to mount either a Dometic or ARB fridge slide elevated above your tailgate when pulled out. It also has molle for mounting first aid kits or other accessories you'll need to pull out quickly. Will have rubber stoppers on the bottom.||FRIDGE SLIDE MOUNT
||Our Bike Mount will attach to your existing Flat Carrier Plates from behind and is fully adjustable to your bikes height and width. Includes two straps, one for the rear tire, and the other strap can be used to keep the bike secure.|
|Our Bottle Cap Remover is made of stainless steel, includes black carriage bolts for mounting to your XPLOR Bed rack and is wire brushed by the handsome gentlemen at Rebel Off Road.||BOTTLE CAP REMOVER
|ANTENNA & LIGHT MOUNT
||the Antenna & light Mount is perfect for attaching communications antennas or area lights to your XPLOR Rack. This mount can be installed in the front or rear of the XPLOR Rack using the already supplied carriage bolts.|
|Standoff Bracket is used to mount additional flat carrier plates to the inside of the XPLOR Bed Rack. This enables you to mount additional accessories to the inside of the rack. Each Carrier Plate requires two Standoff Brackets to securely mount carrier plates.||STANDOFF BRACKET
|FLAT CARRIER PLATE
Flat Carrier Plates are perfect for mounting a large assortment of accessories outside, inside and on top of our XPLOR Racks. With T-Slot and Molle mounting options, you're free to create any set up your next adventure demands.
PLEASE NOTE: You must order 2X Stand Off Brackets per Carrier Plate
|Our Top Channel brackets can be mounted anywhere on the XPLOR bed racks. Typically, they're used for mounting on the top of the rack for attaching rooftop tents to the XPLOR Rack, but can also be used on the side to mount an assortment of additional brackets/accessories.||SMALLER TOP CHANNEL
||The Headache Rack mounts to the XPLOR Rack (full height only) crossbars directly behind your rear window and adds additional safety and protection from any of the items you've placed loose in the back of your Gladiator.|
CHECK OUT OUR FULL LINE OF CURATED 3RD PARTY ACCESSORIES HERE
Overall great product , however several of the pieces arrived damaged, bent . I upgraded to the black hardware which showed up scraped and scratched . Once everything was together and on the truck , it is great precisely what I wanted.
This rack is amazing and exactly what I was looking for in my build. Everything fit together perfectly and I was overnighted one missing part for the bed rail kit. Thank you Rebel for building such a great product and for your amazing customer support!
Amazing customer service , quick shipping and very durable product Price is a tad expensive but I’m very satisfied
Heavy duty product with great hardware. Only issue was one crossbar presumably got bent in transit so I had to use a vice to bend it back and touch up paint.
Love the look, ease of assembly, and the quality. Looking forward to adding a roof tent and accessories over winter for some spring camping.
Everything was shipped reasonably fast, fit & finish was top notch, very heavy duty.
The rack was pretty painless to assemble. It does have some weight to it so if assembling it by yourself you better have help to put it on the truck.
All in all took about maybe an hour to install the bed rails and full bed rack. It's packaged well, ships quickly, and easy to follow directions.
Fits perfectly on the bed. Wasn’t hard to install by myself