G2 Axle & Gear

G2 Gear & Axle JK Core 44 Lifted Front With 5.13 Ratio and 35 Spline Auburn Ected

(No reviews yet) Write a Review
SKU:
G2-C4JMFL513MP5
Availability:
Non Stocking Item- Lead Times Vary Based On Availability
Weight:
440.00 LBS
  • G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.Technical DetailsJK High Pinion Front with 5.13 gear ratio and Auburn EctedUtilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaftUSA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shaftsHeavy duty Dana Spicer 5-7166X Axle U-JointsFactory style flange pinion yoke3 Degrees extra axle caster for 6in. and up liftsMassive forged inner C-endsIntegrated skid plates on lower control arm mountsHeavy-duty 1/4in. laser cut bracketsHeavy duty 3in. diameter 5/16in. DOM tubesReinforcing ribs for added strength and protectionUses metric Rubicon style carrier bearingsHeavy duty forged bearing capsSpanner nuts for backlash adjustmentHeat-treated aluminum diff cover with cooling fins
  • G2 Gear & Axle JK Core 44 Lifted Front With 5.13 Ratio and 35 Spline Auburn Ected
  • G2 Gear & Axle JK Core 44 Lifted Front With 5.13 Ratio and 35 Spline Auburn Ected
  • G2 Gear & Axle JK Core 44 Lifted Front With 5.13 Ratio and 35 Spline Auburn Ected
$4,299.99

Description

G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6" and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8" Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.

Technical Details

  • JK High Pinion Front with 5.13 gear ratio and Auburn Ected
  • Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
  • USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
  • Heavy duty Dana Spicer 5-7166X Axle U-Joints
  • Factory style flange pinion yoke
  • 3 Degrees extra axle caster for 6in. and up lifts
  • Massive forged inner C-ends
  • Integrated skid plates on lower control arm mounts
  • Heavy-duty 1/4in. laser cut brackets
  • Heavy duty 3in. diameter 5/16in. DOM tubes
  • Reinforcing ribs for added strength and protection
  • Uses metric Rubicon style carrier bearings
  • Heavy duty forged bearing caps
  • Spanner nuts for backlash adjustment
  • Heat-treated aluminum diff cover with cooling fins
View AllClose

0 Reviews

View AllClose

Related Products